UKPOC forums

I found the instructions on how to by pass the Bosh immobiliser on my Ford Probe. One of the three methods described says "make up three wires and insert into the stated pin numbers". Is this done just into the plug with the immobiliser removed or with the plug then inserted back into the immobiliser. I have done it into the plug only but the car just turns over.

Thank you in advance

Geoff Shaw

Take the Mobby out, then link the 3 wires into the plug connectors then Drop kick
the Mobby

Thank you

so immobilser does not get refitted leaving the three wires inserted into the plug

If you link together the Wires according to the Write up then the Car should start and run.
Once your happy everything is working OK then cut the Wires in linked pairs (one pair at a time) and twist / solder together for a permanent fix.
The Immobiliser then goes in the bin along with the Button Key Fob

Hi

Car running fine now- no immobiliser or fob anymore. Thank you for giving me the confidence to do the surgery!!

Geoff Shaw

geoff shaw wrote: ↑

Mon Jul 22, 2019 9:17 am

Hi

Car running fine now- no immobiliser or fob anymore. Thank you for giving me the confidence to do the surgery!!

Geoff Shaw

That`s what this club is all about, helping other members to keep these cars on the road (well done to all who gave advise)

Geoff have you considered becoming a full member (£10 per year) would cost you more if you took the car to a garage

All

Thank you for your help on this. I attach the original notes from your forum with my experience added

may be useful for another probe owner

thanks again

Geoff Shaw

Glad she,s running another Quick fix from UKPOC
for Free

Possibly the dumbest question on this forum -

Is there a specific wire I should use for linking the pairs? The guide mentions 10a standard wire, but google doesn't give a result, which means I have no idea what to do next.

Thanks as usual your all great people!