Page 1 of 1
Handbrake Cables Knowledge
Posted: Wed Jul 10, 2019 5:16 pm
by Incognito
For the none techy mind, just to check, is it one front cable that leads to two rear cables? And if so , are the left and right cables the same and are they the same for 16v/24v.?
Cheers.
Paul.
Re: Handbrake Cables Knowledge
Posted: Wed Jul 10, 2019 5:25 pm
by Kit
Incognito wrote: ↑Wed Jul 10, 2019 5:16 pm
For the none techy mind, just to check, is it one front cable that leads to two rear cables? And if so , are the left and right cables the same and are they the same for 16v/24v.?
Cheers.
Paul.
Cables are handed, but if you ( or you’re going to get someone ), to replace them make sure their the same manufacturer, or if there slightly different lengths, there a pig to adjust the hand brake “bit point”
Kit
Re: Handbrake Cables Knowledge
Posted: Thu Jul 11, 2019 9:43 pm
by Micron
Replace all 3 because the replacements have a larger size nipple to the originals, so you have to place all 3 parts. They ate a bit of a pain to do, and good luck with the heat shield.