UKPOC forums

Hello chaps,

Just spent a load of cash getting CV half shafts done on front of car.. then on way home today breaks didn't seem to slow me down much.




I need a front bumper, radiator, bonnet, rad fans, and driver side headlight and frame that rad attaches to... Does anyone think this is possible to fix?

Duncan aka Kit should have most of the parts needed mate
I have a 24v rad with fans here,i would strip the bumper off
then measure from the bulk head on the nearside to the
front crossmember as it seems un affected then the same
on the off side to see if any difference then go from there

oh dear, hopefully as Kev says strip things down and check there`s no damage to the front cross member,

Firstly oh crap,we'll do our best to get you back up and running

If those chaps can't help you I might be able to step in

I have a radiator with fans & a black front bumper

If you get stuck I'm sure I have a front bumper here but wrong colour if it helps

Yep, bumper here , in black if you need it.
Bonnet, wings, etc

Other bit if you needed them

Kit

Thanks everyone for the responses. Will access extent of damage tomorrow and get back with What's needed. ) Feel much better about it now

That sucks. What bad Luck.

Don't want to be the bearer of bad news but the panel in front of the radiator is badly bent and a good way back, I''m looking at the angle of the headlights too - check the chassis legs aren't twisted.

lots of good offers of help,

i may have some bits too,

depends on who is nearest to you, especially with things like bonnets......

all the best

But, why didn’t you stop!
The brakes on a Probe are generally quiet good, it there maintained

When was the last time the brake fluid was changed
Are the front pads really worn

When the drive shafts where changed, did the brake get ‘messed with.

Just a thought

Regards

Kit