Page 3 of 4
Re: In need of parts urgently...
Posted: Sun Jun 16, 2019 1:11 pm
by KBUK
Kit wrote: ↑Sat Jun 15, 2019 8:59 pm
With that amount of damage
Didn't the air bags go off !!
There's three crash sensor in the bumper area
Kit
No airbags deployed wasn't a big crash just looks bad
Re: In need of parts urgently...
Posted: Sun Jun 16, 2019 1:14 pm
by KBUK
Starting to look better already.. can someone send me a pic of how that crossmember should look and I'll spend a couple hours whacking/bending it into shape.
Re: In need of parts urgently...
Posted: Sun Jun 16, 2019 6:35 pm
by Kit
Parts now in transit
Found most bits, apart from the O/s infill, below the headlight.
Kit
Re: In need of parts urgently...
Posted: Mon Jun 17, 2019 8:02 am
by cpt black
Well done Duncan
Bet Jan,s happy bit more space
Re: In need of parts urgently...
Posted: Mon Jun 17, 2019 6:31 pm
by Elland 57
Can see a few blades of grass
Re: In need of parts urgently...
Posted: Mon Jun 17, 2019 8:45 pm
by KBUK
For those interested, bonnet is now on and aligned with side panels, fearing for offside light being misshapen. Need to remove/replace rightside light but stopped by two bolts I can't access (parts in office).
Cross member in correct position but needs flattening out (purchased some clamps from Amazon which should hopefully do trick).
Tomorrow's job is removing light and replacing, will also grab some Rustol since I have access to everything and some paint.
Feeling confident she will live.
Re: In need of parts urgently...
Posted: Mon Jul 08, 2019 7:50 pm
by KBUK
Anyone got full sized American headlight covers?
My spacers are broken and the but they connect to on bumper doesn't look healthy
Re: In need of parts urgently...
Posted: Tue Jul 09, 2019 3:39 pm
by mmm24v
Did reply to this before the last forum crash,here goes
Got some us lids but dunno how easy to fit onto uk...
It might be easier just to take the complete set
Re: In need of parts urgently...
Posted: Tue Jul 09, 2019 6:17 pm
by Kit
mmm24v wrote: ↑Tue Jul 09, 2019 3:39 pm
Did reply to this before the last forum crash,here goes
Got some us lids but dunno how easy to fit onto uk...
It might be easier just to take the complete set
Yes , you can make them fit the UK cages, with a bit of modifications of the lugs
Kit
Re: In need of parts urgently...
Posted: Tue Jul 09, 2019 7:35 pm
by KBUK
Getting warmer..