Page 2 of 4
Re: In need of parts urgently...
Posted: Sat Jun 15, 2019 12:49 pm
by KBUK
Pads at front are newish, ebc yellow stuff. Discs were maybe a bit cheap from probestore. They didn't feel perfect since I got the driveshafts changed
Re: In need of parts urgently...
Posted: Sat Jun 15, 2019 4:42 pm
by KBUK
Re: In need of parts urgently...
Posted: Sat Jun 15, 2019 4:46 pm
by KBUK
One more part to add to list, coolant reservoir on the right side with the metal cap on top as the hose pipe at the bottom has snapped
Re: In need of parts urgently...
Posted: Sat Jun 15, 2019 5:10 pm
by cpt black
I would say the front cross member is FUBA as it,s bent back and upwards,you would need
a scrap car to cut one out and weld in then a bonnet to align for the bonnet catch and
wing alignment or use bonnet clips to hold down the bonnet, if you go the bonnet clips way
you may get away with pulling the cross member out are the wings scrapping the
doors
Re: In need of parts urgently...
Posted: Sat Jun 15, 2019 5:34 pm
by KBUK
Ok guys, got radiator removed think also need rad for AC and debating to grind out then cross member and replace?
Re: In need of parts urgently...
Posted: Sat Jun 15, 2019 5:47 pm
by cpt black
You may need an A/C Rad if leaking,did my mates one when he hit a deer was,nt leaking so bent
back in shape
get a bonnet first and align, bonnet clips or pins will do to hold the bonnet
Re: In need of parts urgently...
Posted: Sat Jun 15, 2019 6:11 pm
by KBUK
cpt black wrote: ↑Sat Jun 15, 2019 5:10 pm
I would say the front cross member is FUBA as it,s bent back and upwards,you would need
a scrap car to cut one out and weld in then a bonnet to align for the bonnet catch and
wing alignment or use bonnet clips to hold down the bonnet, if you go the bonnet clips way
you may get away with pulling the cross member out are the wings scrapping the
doors
Wings are absolutely find apart from a tiny bend at the tip near driver light
Re: In need of parts urgently...
Posted: Sat Jun 15, 2019 6:20 pm
by cpt black
Seems you maybe lucky there mate,get a Bonnet and retro fit it to the cross member
and wnigs
Re: In need of parts urgently...
Posted: Sat Jun 15, 2019 8:59 pm
by Kit
With that amount of damage
Didn't the air bags go off !!
There's three crash sensor in the bumper area
Kit
Re: In need of parts urgently...
Posted: Sun Jun 16, 2019 1:10 pm
by KBUK
To he honest, it wasn't a bad hit. His car has a very minor scratch on the bumper. We were both braking hard so I think I went underneath and then weight of his sat on the bumper/crossmember