For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
Forbs
- Registered User
- Posts: 25
- Joined: Wed Mar 03, 2021 10:07 am
Post
by Forbs » Thu Jun 10, 2021 2:35 pm
Any of the techys help me out here... every now and again my oil pressure needle will drop to zero on idle, it'll go back to normal when there's revs... any ideas?... thanx in advance
-
Micron
- Site Admin
- Posts: 3334
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 61 times
- Been thanked: 89 times
Post
by Micron » Thu Jun 10, 2021 3:10 pm
what year is your car, because early cars have what we would call proper oil pressure switches and read actual oil pressure, later ones don't.
as for why, it might be a faulty oil pressure switch, have you checked the oil level?
Admin and Owner of this fine club
-
Andy W
- Full Member
- Posts: 503
- Joined: Thu Sep 06, 2018 11:49 pm
- Has thanked: 1 time
- Been thanked: 2 times
Post
by Andy W » Thu Jun 10, 2021 5:51 pm
If it's the early type then it could be the sender unit - they go faulty after a bit and they aren't cheap to replace.
-
Forbs
- Registered User
- Posts: 25
- Joined: Wed Mar 03, 2021 10:07 am
Post
by Forbs » Thu Jun 10, 2021 6:29 pm
It's a late 16v... I've just literally done a full service on it so I'll see how it goes
-
Micron
- Site Admin
- Posts: 3334
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 61 times
- Been thanked: 89 times
Post
by Micron » Thu Jun 10, 2021 6:38 pm
It could still be the switch it it's all or nothing!
Admin and Owner of this fine club
-
Incognito
- Full Member
- Posts: 2269
- Joined: Thu Sep 06, 2018 9:27 pm
- Has thanked: 48 times
- Been thanked: 18 times
Post
by Incognito » Thu Jun 10, 2021 8:23 pm
Mine hasn't worked for a long time now so this is a learning post for me. Mine just stays rock bottom all the time .
-
Jon G 24V
- Tech Rep
- Posts: 659
- Joined: Fri Sep 07, 2018 8:05 pm
- Has thanked: 1 time
- Been thanked: 7 times
Post
by Jon G 24V » Mon Jun 14, 2021 9:53 pm
I’d say it is probably the sensor that is failing.
-
Kit
- Tech Rep
- Posts: 3551
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Wed Jun 16, 2021 9:54 am
Incognito wrote: ↑Thu Jun 10, 2021 8:23 pm
Mine hasn't worked for a long time now so this is a learning post for me. Mine just stays rock bottom all the time .
Check the wire is still connected to sender
Kit
Who is online
Users browsing this forum: No registered users and 41 guests
