DOOR KEY LAMP

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Philippe
Registered User
Posts: 14
Joined: Fri Apr 30, 2021 7:28 pm
Been thanked: 1 time

Re: DOOR KEY LAMP

Post by Philippe » Thu May 27, 2021 10:27 pm

Thanks for the info, on Sunday, I will check if there is electrical current on the driver's side door harness which controls the microswitch and lightbulb and see what voltage comes up on the blue and black wires, and then check the voltage on the 2 white wires for the lightbulb. To try and make it connect, I will create a bypass to the blue and black wire as if the microswitch was being operated
I am 100% sure all 3 lightbulbs (2 door and ignition key) are in working order and I tested the microswitch and its definitely working so must be the CPU. I will try and find a diagram that shows faulty capacitors. That way, if it is the capacitors, I can replace them rather than get a new CPU
Top
Philippe
Registered User
Posts: 14
Joined: Fri Apr 30, 2021 7:28 pm
Been thanked: 1 time

Re: DOOR KEY LAMP ELECTRICAL MYSTERY

Post by Philippe » Mon May 31, 2021 11:22 pm

Hey guys, here's a picture with the new light bulb fitted 5mm in diameter, 11mm in length, 12V, 1 watt.
I was able to test the bulb was working by connecting the wires to an external source, i.e. 12V Battery

Image

I did some further tests-
Microswitch continuity check was ok, however, when I did a read out of the voltage, it was lower than expected, I thought I was going to get 12V, instead I got 4V. Please see picture below

Image

On the white wires for the bulb, I have 0 volts.

I am assuming therefore that the CPU is at fault or at least the 3 capacitors are at fault and I am considering changing them to see what happens.
Top
Philippe
Registered User
Posts: 14
Joined: Fri Apr 30, 2021 7:28 pm
Been thanked: 1 time

Re: DOOR KEY LAMP

Post by Philippe » Tue Jun 01, 2021 12:03 am

These are pictures of the CPU. I can't see any damage any shape or form and it looks clean and dust free.

Image

Image


I have circled the capacitors, C1, C21, C3 which I think might be the reason why all 3 lightbulbs don't work.

Image

If anyone has any idea or a blueprint of the CPU that would handy.

Thanks Guys
Top
Philippe
Registered User
Posts: 14
Joined: Fri Apr 30, 2021 7:28 pm
Been thanked: 1 time

Re: DOOR KEY LAMP

Post by Philippe » Tue Jun 01, 2021 7:58 pm

I've got some pictures of one of the Relays on the CPU, OMRON G8Q 1C4, 12VDC, 2984D6, T78-1C (please see pictures below)

Does anyone know what this particular Relay is for?

Image

Image

Thanks guys
Top
Philippe
Registered User
Posts: 14
Joined: Fri Apr 30, 2021 7:28 pm
Been thanked: 1 time

Re: DOOR KEY LAMP

Post by Philippe » Sat Jun 12, 2021 11:22 am

I have found blueprints/diagrams of the interior Fuse box, does anyone have anything similar for the CPU which is attached to the interior fuse box?

Image

Image

Image

Image
Top
Tott61
Full Member
Posts: 165
Joined: Tue May 11, 2021 7:14 pm
Been thanked: 5 times

Re: DOOR KEY LAMP

Post by Tott61 » Tue Sep 28, 2021 8:43 pm

The light on my door lock needs replacing.
How do you replace the bulb as I believe it's is contained in aplastic casing

Thanks
Top
Kit
Tech Rep
Posts: 3551
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 71 times
Been thanked: 115 times

Re: DOOR KEY LAMP

Post by Kit » Wed Sep 29, 2021 12:37 pm

The bulb in held a rubber , on the clip that holds the lock in place- see photos

Image

Image
Here, the wire from the bulb, broken off during the removal from the door

Kit
Top
Tott61
Full Member
Posts: 165
Joined: Tue May 11, 2021 7:14 pm
Been thanked: 5 times

Re: DOOR KEY LAMP

Post by Tott61 » Wed Sep 29, 2021 7:52 pm

Thanks

Could you let me know where you got the harness
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: No registered users and 32 guests