speedo heads

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
sockett 1962 ][
Full Member
Posts: 112
Joined: Fri Sep 07, 2018 8:43 pm
Been thanked: 3 times

speedo heads

Post by sockett 1962 ][ » Wed Nov 04, 2020 7:44 pm

are 24v and 16v speedo s interchangerble as sometimes 4 cyl and 6 cyl rev counters could be different

Micron
Site Admin
Posts: 3336
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 61 times
Been thanked: 89 times

Re: speedo heads

Post by Micron » Wed Nov 04, 2020 9:02 pm

sockett 1962 ][ wrote:
Wed Nov 04, 2020 7:44 pm
are 24v and 16v speedo s interchangerble as sometimes 4 cyl and 6 cyl rev counters could be different
If you mean the whole clocks, then there is a difference, in that the dial goes up higher on the 24v. If it's the actual mechanism then I'm not sure?
Admin and Owner of this fine club 😎

Sunfly
Full Member
Posts: 1026
Joined: Fri Sep 07, 2018 9:11 am
Been thanked: 23 times

Re: speedo heads

Post by Sunfly » Wed Nov 04, 2020 11:50 pm

The rev counter gets its pulse from the distributor so I guess the 16 and 24V rev counters must be different which is worth considering if you are changing the whole cluster, but other than top speed "range" I cant think of a reason why the speedo should be different. I think I remember reading that the pickup is on the gearbox - obviously on the final drive.

sockett 1962 ][
Full Member
Posts: 112
Joined: Fri Sep 07, 2018 8:43 pm
Been thanked: 3 times

Re: speedo heads

Post by sockett 1962 ][ » Thu Nov 05, 2020 4:08 pm

thanks for replys i have another 24v so think i will swop clocks between them at weekend and see what happens tested speed sensor and get a voltage so thought either clock or wiring between them

el plates
Full Member
Posts: 220
Joined: Thu Sep 06, 2018 9:24 pm

Re: speedo heads

Post by el plates » Sat Nov 07, 2020 1:28 am

not sure,

but i think there may be a slight difference between early and late cars?

not actually noticeable untill you connect them up and i think the oil or alternator readings sometimes do not work properly????

but might just be the ones that ive had???

:)

Post Reply

Who is online

Users browsing this forum: No registered users and 25 guests