Search found 27 matches
- Thu Apr 09, 2020 10:14 pm
- Forum: The Garage - Technical Forum
- Topic: Laser Tint Red Paint
- Replies: 2
- Views: 7560
Re: Laser Tint Red Paint
Laser tint is a beautiful colour but you cannot easily touch it up. Basically it is a silver undercoat and the colour is actually made up by the translucent red top coat. this gives the end colour that pearlescent sparkly effect. But as said, if you get a nasty scratch its repaint the whole panel. p...
- Sun Aug 11, 2019 9:06 pm
- Forum: The Garage - Technical Forum
- Topic: wanted lower front wishbone bolt
- Replies: 6
- Views: 12939
Re: wanted lower front wishbone bolt
An M10 bolt 50mm long + use a Ny-loc nut Got a OME one here if you need it Kit that sounds like the lower ball joint to the hub..... i was after the long one at the front of the wishbone nut is held by a welded cage, and thats where the dirt gets stuck and it rusts it all up...... bolt feeds from t...
- Sun Aug 11, 2019 9:24 am
- Forum: The Garage - Technical Forum
- Topic: wanted lower front wishbone bolt
- Replies: 6
- Views: 12939
Re: wanted lower front wishbone bolt
Thanks Duncan,
I am sure i have one in my spares somewhere also......but just needed the info.
i can source locally as i need it quickly for the MOT next week.
and i am sure it will fail without one.... lol lol
many thanks for the offer.
Thanks for the info.
See you soon.
I am sure i have one in my spares somewhere also......but just needed the info.
i can source locally as i need it quickly for the MOT next week.
and i am sure it will fail without one.... lol lol
many thanks for the offer.
Thanks for the info.
See you soon.
- Sat Aug 10, 2019 11:18 pm
- Forum: The Garage - Technical Forum
- Topic: wanted lower front wishbone bolt
- Replies: 6
- Views: 12939
wanted lower front wishbone bolt
As the title suggests.............
Lower front wishbone bolts and nut... required
Had to cut mine off when replacing the wishbones,
so any one know the replacement bolt and nut size....
or a link to buying one......
Many thanks,
need it for the MOT
Lower front wishbone bolts and nut... required
Had to cut mine off when replacing the wishbones,
so any one know the replacement bolt and nut size....
or a link to buying one......
Many thanks,
need it for the MOT
- Fri Jul 19, 2019 11:31 pm
- Forum: The Garage - Technical Forum
- Topic: Holes in my sills both sides at rear
- Replies: 18
- Views: 35287
Re: Holes in my sills both sides at rear
common issue, difficult to say, depends on the extent of rust. any pictures..... can only check the inners once you have cut out the rust on the outer.... most repairs are doable all depends on how deep your pockets and the overall condition of the rest of the car. But both inner and out has been re...
- Sat Jun 15, 2019 7:28 am
- Forum: The Garage - Technical Forum
- Topic: In need of parts urgently...
- Replies: 35
- Views: 66490
Re: In need of parts urgently...
lots of good offers of help,
i may have some bits too,
depends on who is nearest to you, especially with things like bonnets......
all the best
i may have some bits too,
depends on who is nearest to you, especially with things like bonnets......
all the best
- Tue Nov 27, 2018 7:04 pm
- Forum: The Garage - Technical Forum
- Topic: 1995 dark blue v6 probe
- Replies: 5
- Views: 12198
Re: 1995 dark blue v6 probe
to be sure,
look for the code on the vin plate under the bonnet.
sometimes the reg date is not an exact science....
if its MQ then its electric blue
look for the code on the vin plate under the bonnet.
sometimes the reg date is not an exact science....
if its MQ then its electric blue
- Sun Nov 04, 2018 7:24 pm
- Forum: The Garage - Technical Forum
- Topic: V6 removal of the speed sensor on the gear box?
- Replies: 11
- Views: 24548
Re: V6 removal of the speed sensor on the gear box?
Woo Hoo
good to hear it came out ok.
i was a bit worried passing on a whole gearbox if had had broken coming out......
it was soaked in WD40 every 3 or 4 days, over the course of 3 weeks.
Plus it was out of the car...
All the best.
Good luck with refit......
good to hear it came out ok.
i was a bit worried passing on a whole gearbox if had had broken coming out......
it was soaked in WD40 every 3 or 4 days, over the course of 3 weeks.
Plus it was out of the car...
All the best.
Good luck with refit......
- Sun Oct 21, 2018 8:02 am
- Forum: The Garage - Technical Forum
- Topic: Radiator & heater hoses
- Replies: 3
- Views: 8590
Re: Radiator & heater hoses
As said i can probably russle up a set of old hoses....
but it that what you want / need....
but it that what you want / need....
- Fri Oct 19, 2018 7:07 pm
- Forum: The Garage - Technical Forum
- Topic: Radiator & heater hoses
- Replies: 3
- Views: 8590
Re: Radiator & heater hoses
did you mean the radiator and the radiator hoses.... or did you mean radiator hoses and heater hoses???? are you looking for aftermarket... eg samco or standard black???? new or used. are you looking to replace a faulty one? sorry 20 questions but it depends what you want and therefore what people c...