Hey guys,
Bit of a long shot, anyone know where I can get original brake pipe clips/similar ones? Renewed the two rear pipes and cracked two of the clips in the process.
Thanks.
Search found 71 matches
- Tue Dec 29, 2020 9:56 pm
- Forum: The Garage - Technical Forum
- Topic: Brake Pipe Clips
- Replies: 7
- Views: 12808
- Sun Oct 18, 2020 8:12 pm
- Forum: The Garage - Technical Forum
- Topic: rear track control arm
- Replies: 7
- Views: 13904
Re: rear track control arm
All the control arms are interchangeable with the 626 ge right?
- Wed Sep 02, 2020 10:04 pm
- Forum: The Garage - Technical Forum
- Topic: Front wishbone suspension compatibility 2.0 and 2.5
- Replies: 2
- Views: 6296
Re: Front wishbone suspension compatibility 2.0 and 2.5
Perfect cheers man.
- Wed Sep 02, 2020 12:00 pm
- Forum: The Garage - Technical Forum
- Topic: Front wishbone suspension compatibility 2.0 and 2.5
- Replies: 2
- Views: 6296
Front wishbone suspension compatibility 2.0 and 2.5
Hey,
Can anyone confirm that the front wishbones are different between the 2.0l and 2.5l? They look identical, but most ebay listings I've come across dont list the other engine size.
Thanks,
Can anyone confirm that the front wishbones are different between the 2.0l and 2.5l? They look identical, but most ebay listings I've come across dont list the other engine size.
Thanks,
- Sun Jun 21, 2020 8:48 pm
- Forum: The Garage - Technical Forum
- Topic: swapping a 1997 engine into a 1995
- Replies: 5
- Views: 12004
Re: swapping a 1997 engine into a 1995
Perfect thanks. Your so helpful
- Sun Jun 21, 2020 4:04 pm
- Forum: The Garage - Technical Forum
- Topic: swapping a 1997 engine into a 1995
- Replies: 5
- Views: 12004
Re: swapping a 1997 engine into a 1995
Sorry I should have been clearer, it's a 2l to 2l. Same engine, just the 97 is so smooth but its body is rusted as heck.
The main thing was to check any immobiliser problems/do I have to bring the ECU with it?
The main thing was to check any immobiliser problems/do I have to bring the ECU with it?
- Sat Jun 20, 2020 11:10 pm
- Forum: The Garage - Technical Forum
- Topic: swapping a 1997 engine into a 1995
- Replies: 5
- Views: 12004
swapping a 1997 engine into a 1995
Hey guys, I'm going to pull a beauty of a 97' engine and gearbox and put it into a beauty shell of a 95. Is it a case of disconnect everything, swap, connect everything, woophee? The 95 is the old immobilizer whereas the 97 is the newer one - I'll bypass the old immobilizer but could that cause any ...
- Mon May 25, 2020 10:06 pm
- Forum: The Garage - Technical Forum
- Topic: Bolt tensile strength
- Replies: 2
- Views: 7016
Bolt tensile strength
Hey guys,
Maybe a dumb question but I thought it best to confirm here. The bolts with "10" and "8" on their heads represent 10.9 and 8.8 tensile strength respectively right? Its odd they just have a single number as the internet has no trace of them.
Thanks,
Maybe a dumb question but I thought it best to confirm here. The bolts with "10" and "8" on their heads represent 10.9 and 8.8 tensile strength respectively right? Its odd they just have a single number as the internet has no trace of them.
Thanks,
- Mon May 25, 2020 10:05 pm
- Forum: The Garage - Technical Forum
- Topic: Only seen this once before on a Probe !
- Replies: 1
- Views: 5511
Re: Only seen this once before on a Probe !
My 1995 N reg has Allan Key screws too. (The same ones). My dust shields were in considerably worse condition too!
- Wed May 20, 2020 9:11 pm
- Forum: The Garage - Technical Forum
- Topic: Fuel Filler Neck
- Replies: 4
- Views: 10440
Re: Fuel Filler Neck
hehe okay thanks!