Has the car got wet recently, because what can happen is water gets in to the switches on the door locks and normally causes them to unlock, but I guess the opposite could also apply.
Also do you have aftermarket remote locking or alarm fitted to the car as they could be your problem
Search found 681 matches
- Sat Sep 30, 2023 8:32 pm
- Forum: The Garage - Technical Forum
- Topic: Randomly locking
- Replies: 6
- Views: 30572
- Thu Sep 28, 2023 5:37 pm
- Forum: The Garage - Technical Forum
- Topic: fuel Gauge
- Replies: 7
- Views: 44238
Re: fuel Gauge
diagram exerts sent 
- Thu Sep 21, 2023 9:15 pm
- Forum: The Garage - Technical Forum
- Topic: Cruise
- Replies: 12
- Views: 42173
Re: Cruise
Have a search in the oracle as there is a post on what to test on the cruise circuit
- Wed Sep 20, 2023 6:51 pm
- Forum: The Garage - Technical Forum
- Topic: Handbrake Failure
- Replies: 8
- Views: 33677
Re: Handbrake Failure
Take off the adjustment that the handbrake, jack up the car and adjust it there to take up the slack, then final adjustment at the handbrake
That’s the short version
That’s the short version
- Mon Sep 18, 2023 8:53 pm
- Forum: The Garage - Technical Forum
- Topic: Cruise
- Replies: 12
- Views: 42173
Re: Cruise
I had to change mine, as I had the same problem, the tricky bit is the cable to the throttle body It works fine now. Any tips on how to attach cable to throttle body ? Not without looking at it, but it wasn’t that hard, just disconnect it from the module, and put the casing ( I believe) with the ca...
- Mon Sep 18, 2023 8:51 pm
- Forum: The Garage - Technical Forum
- Topic: Cruise control module fitting
- Replies: 2
- Views: 15765
Re: Cruise control module fitting
There are about 3 nuts that need to come off, plus the plug on the front, I found that the easiest option for the cable was to remove it from the module end and take the cable and fitting on to the new one.
It shouldn’t take that long.
It shouldn’t take that long.
- Sun Sep 17, 2023 9:33 am
- Forum: The Garage - Technical Forum
- Topic: Cruise
- Replies: 12
- Views: 42173
Re: Cruise
I had to change mine, as I had the same problem, the tricky bit is the cable to the throttle body
It works fine now.
It works fine now.
- Sun Sep 17, 2023 8:37 am
- Forum: The Garage - Technical Forum
- Topic: Cruise
- Replies: 12
- Views: 42173
- Sat Sep 16, 2023 5:00 pm
- Forum: The Garage - Technical Forum
- Topic: Cruise
- Replies: 12
- Views: 42173
Re: Cruise
You have to be doing at least 30mph, then you switch it on with the LH switch ( no indications) then you set the speed with the RH switch ( still no indications) I would hold the set button for a bit, if it engages you might find it drops before it picks up again. The RSM is resume after braking, ca...
- Mon Sep 11, 2023 8:09 am
- Forum: The Garage - Technical Forum
- Topic: Carpet Cleaning
- Replies: 7
- Views: 17521
. the main pain is you have to loosen or remove the seat belt anchors and some of the trim.