There should be a little light on the key fob which lights up if the battery is ok when you press the button.
Then you should hear a 'click' as the relays work in the moby.
Then the engine should crank over, etc.
Search found 353 matches
- Sun Oct 23, 2022 11:10 am
- Forum: The Garage - Technical Forum
- Topic: ABS warning light and chewed wires!
- Replies: 29
- Views: 5977
- Sat Oct 15, 2022 12:44 pm
- Forum: The Garage - Technical Forum
- Topic: ABS Sensor Problem ( Front Left )
- Replies: 5
- Views: 1693
Re: ABS Sensor Problem ( Front Left )
The intermittent fault as you drive may be a broken connection somewhere along the wire. IF you have a digital voltmeter you could try putting a bent 90deg nail in your electric drill , connect voltmeter to the two wires set to lowest voltage, start drill and try to get the nail head skimming close ...
- Wed Sep 14, 2022 12:43 pm
- Forum: The Garage - Technical Forum
- Topic: MX6 Flexi Blown
- Replies: 5
- Views: 2277
Re: MX6 Flexi Blown
Finding a flexy is easy , the next trick is getting the bolts out of the manifold flanges intact .
- Wed Aug 31, 2022 1:50 pm
- Forum: The Garage - Technical Forum
- Topic: Front Wing Remocal….
- Replies: 1
- Views: 1561
Re: Front Wing Remocal….
Ah yes, the front bolt , a trained six year old is what you need , or tiny, tiny hands.
- Thu Aug 11, 2022 12:26 pm
- Forum: The Garage - Technical Forum
- Topic: Unable To Remove Spark Plugs
- Replies: 12
- Views: 6886
Re: Unable To Remove Spark Plugs
Seems like the rubber cap has stuck itself to the inside of the tube.
You're just faced with the task of trying to run a long narrow chisel ended 'screwdriver ' down the tube, to cut the ring off the side of the tube.
You're just faced with the task of trying to run a long narrow chisel ended 'screwdriver ' down the tube, to cut the ring off the side of the tube.
- Mon Aug 08, 2022 9:08 am
- Forum: The Garage - Technical Forum
- Topic: Probe Unusable -Non Tickover
- Replies: 17
- Views: 7828
Re: Probe Unusable -Non Tickover
The condition on slowing down will pull the highest vacuum conditions so something influenced by that situation may be the cause of your problem.
The MAF unit got to be on the list of checks.
The MAF unit got to be on the list of checks.
- Sun Aug 07, 2022 9:38 am
- Forum: The Garage - Technical Forum
- Topic: engine cut out
- Replies: 14
- Views: 6069
Re: engine cut out
Absolutely Bob, and those tiny ignition circuit relay contacts are not big enough for the job after a few years SO you have to either jam that relay on, all the time with a matchstick OR short that circuit permanently.
- Sat Aug 06, 2022 1:04 pm
- Forum: The Garage - Technical Forum
- Topic: engine cut out
- Replies: 14
- Views: 6069
Re: engine cut out
You should ALWAYS have a known working spare distributor anyway , so has to be a first try.
Plus, if the immobiliser hasn't been modified , that has to be sorted too.
Plus, if the immobiliser hasn't been modified , that has to be sorted too.
- Sat Jul 30, 2022 12:31 pm
- Forum: The Garage - Technical Forum
- Topic: Hello!
- Replies: 15
- Views: 5572
Re: Hello!
Pages from Haynes Manual will come in handy to light the fire.
- Sun Jul 24, 2022 10:25 am
- Forum: The Garage - Technical Forum
- Topic: Brake upgrade
- Replies: 8
- Views: 3217
Re: Brake upgrade
Hmmm, if your ABS is preventing the wheels from locking up surely that's as good as you can get without going down the whole design route, of
Tyres ,shockers , discs , etc ?
Tyres ,shockers , discs , etc ?