thanks peeps, all good info.
so the front is the reverse light.
the two wire switch on the back is the speed sensor
so whats the third one with the push fit connector???
Search found 27 matches
- Sun Oct 14, 2018 10:10 pm
- Forum: The Garage - Technical Forum
- Topic: V6 removal of the speed sensor on the gear box?
- Replies: 11
- Views: 28028
- Sun Oct 14, 2018 7:41 am
- Forum: The Garage - Technical Forum
- Topic: V6 removal of the speed sensor on the gear box?
- Replies: 11
- Views: 28028
V6 removal of the speed sensor on the gear box?
ok sorry i imagine its got electrical leads to it???? so that gives me a choice of three.... can someone point me in the right direction..... one at the front (radiator side) is the gearbox oil level sensor????? then there are two at the back: one has two wires and sits very low down on a horizontal...
- Sun Oct 14, 2018 7:33 am
- Forum: The Garage - Technical Forum
- Topic: V6 head removal bolt socket???
- Replies: 2
- Views: 9039
V6 head removal bolt socket???
on a V6, after the cam covers and the cams are out,
head is secured with 8 bolts but what sort of socket do i need???
bolt seems to be a male spline type???
if anyone knows what i need to be looking or asking for,
at my local Car parts and accessories shop...
many thanks
head is secured with 8 bolts but what sort of socket do i need???
bolt seems to be a male spline type???
if anyone knows what i need to be looking or asking for,
at my local Car parts and accessories shop...
many thanks
- Thu Oct 04, 2018 6:53 am
- Forum: The Garage - Technical Forum
- Topic: Flywheel weight reduction???
- Replies: 8
- Views: 19458
Re: Flywheel weight reduction???
many thanks, much appreciated....
great informative answer...
will probably leave alone, but was worth the ask as education is always priceless....
all the best
great informative answer...
will probably leave alone, but was worth the ask as education is always priceless....
all the best
- Mon Oct 01, 2018 10:06 pm
- Forum: The Garage - Technical Forum
- Topic: Flywheel weight reduction???
- Replies: 8
- Views: 19458
Re: Flywheel weight reduction???
after market or self machined...
- Mon Oct 01, 2018 6:18 pm
- Forum: The Garage - Technical Forum
- Topic: Flywheel weight reduction???
- Replies: 8
- Views: 19458
Re: Flywheel weight reduction???
Thanks peeps.
- Mon Oct 01, 2018 1:15 pm
- Forum: The Garage - Technical Forum
- Topic: Flywheel weight reduction???
- Replies: 8
- Views: 19458
Flywheel weight reduction???
Think ive asked this before but with the forum issues of late cant find an answer... so here goes. seen threads on other sites about flywheel skimming and lightweight flywheels, in regards to performance gains. Is this just a matter of skimming the rear and taking out 25% of the weight? is this easy...