Both, Jan & myself, drove car regularly, & there was no ‘pre-warning’ at all.
Kit
Search found 792 matches
- Fri Apr 15, 2022 6:34 pm
- Forum: The Garage - Technical Forum
- Topic: Lost drive
- Replies: 29
- Views: 15599
- Fri Apr 15, 2022 3:18 pm
- Forum: The Garage - Technical Forum
- Topic: Lost drive
- Replies: 29
- Views: 15599
Re: Lost drive
Think I’ve found the problem 
There’s no friction material on the flywheel side at all
Now to see what the Flywheels like
Kit
- Thu Apr 14, 2022 8:37 pm
- Forum: The Garage - Technical Forum
- Topic: Lost drive
- Replies: 29
- Views: 15599
Re: Lost drive
So, with a few days off, going to see if I can get to the bottom of the problem. Made a start on removing the gearbox, doing what I can under bonnet, starter motor etc Gearbox off tomorrow, find out what’s wrong Pop over to CPT , Saturday to collect the spare clutch Sunday, to put it all back togeth...
- Thu Apr 14, 2022 2:39 pm
- Forum: The Garage - Technical Forum
- Topic: Water ingestion service kit
- Replies: 2
- Views: 2209
Re: Water ingestion service kit
That’s probably because it is 
Is there a new bit of draught excluder, that goes around the air intake to seal it against the underside side of the bonnet
Kit
Is there a new bit of draught excluder, that goes around the air intake to seal it against the underside side of the bonnet
Kit
- Wed Apr 13, 2022 3:45 pm
- Forum: The Garage - Technical Forum
- Topic: Gasket and seal needed for oil leaks
- Replies: 19
- Views: 10087
Re: Gasket and seal needed for oil leaks
If you have a KLZE engine (very unlikely) you need Square holes in the gaskets
Kit
Kit
- Fri Apr 08, 2022 12:48 pm
- Forum: The Garage - Technical Forum
- Topic: White smoke on startup
- Replies: 18
- Views: 11845
Re: White smoke on startup
Hi all. Long term non prober here, I had both models back in early 2000's and I can categorically state that masses of white smoke on startup of a 16v is due to worn oil control rings. I had nearly 2 years of discrete early morning startups for that very reason, along with many weeks in a garage tr...
- Thu Apr 07, 2022 8:12 am
- Forum: The Garage - Technical Forum
- Topic: Gasket and seal needed for oil leaks
- Replies: 19
- Views: 10087
Re: Gasket and seal needed for oil leaks
Remember, to do the rear cam cover, on the V6.
You need to take off the IM, so, you should replace the inlet IM gasket when you put it back
Kit
You need to take off the IM, so, you should replace the inlet IM gasket when you put it back
Kit
- Wed Apr 06, 2022 10:07 pm
- Forum: The Garage - Technical Forum
- Topic: New rad
- Replies: 8
- Views: 5790
Re: New rad
If the rad’s drain tap is leaking,
I think, if you take it out completely, there’s a rubber ‘O’ ring, that forms the seal.
Try, replacing that
Kit
I think, if you take it out completely, there’s a rubber ‘O’ ring, that forms the seal.
Try, replacing that
Kit
- Wed Apr 06, 2022 1:16 pm
- Forum: The Garage - Technical Forum
- Topic: Gasket and seal needed for oil leaks
- Replies: 19
- Views: 10087
Re: Gasket and seal needed for oil leaks
Don’t you mean Cam cover gaskets
The IM gaskets, is a ‘Dry joint’ , there is no oil here.
With the Dizzy, it’s a new ‘O’ ring you need.
You should be able to purchase that locally, from Auto parts shop
Kit
The IM gaskets, is a ‘Dry joint’ , there is no oil here.
With the Dizzy, it’s a new ‘O’ ring you need.
You should be able to purchase that locally, from Auto parts shop
Kit
- Tue Apr 05, 2022 9:05 pm
- Forum: The Garage - Technical Forum
- Topic: Rear Cross Member
- Replies: 3
- Views: 2593
Re: Rear Cross Member
Ford Probe 2.0 16v Should the rear Cross Member have two plastic covers in the middle where the lateral arms connect to the crossmember. If so would anyone have a spare set for sale Thanks Yes, I’ll have a look at the weekend , to see if I’ve got a set Plus, the other bits, members are looking for ...