Search found 71 matches

by MikeyG
Tue Dec 29, 2020 9:56 pm
Forum: The Garage - Technical Forum
Topic: Brake Pipe Clips
Replies: 7
Views: 11964

Brake Pipe Clips

Hey guys,

Bit of a long shot, anyone know where I can get original brake pipe clips/similar ones? Renewed the two rear pipes and cracked two of the clips in the process.

Thanks.
by MikeyG
Sun Oct 18, 2020 8:12 pm
Forum: The Garage - Technical Forum
Topic: rear track control arm
Replies: 7
Views: 13195

Re: rear track control arm

All the control arms are interchangeable with the 626 ge right?
by MikeyG
Wed Sep 02, 2020 12:00 pm
Forum: The Garage - Technical Forum
Topic: Front wishbone suspension compatibility 2.0 and 2.5
Replies: 2
Views: 6092

Front wishbone suspension compatibility 2.0 and 2.5

Hey,

Can anyone confirm that the front wishbones are different between the 2.0l and 2.5l? They look identical, but most ebay listings I've come across dont list the other engine size.

Thanks,
by MikeyG
Sun Jun 21, 2020 8:48 pm
Forum: The Garage - Technical Forum
Topic: swapping a 1997 engine into a 1995
Replies: 5
Views: 11648

Re: swapping a 1997 engine into a 1995

Perfect thanks. Your so helpful :)
by MikeyG
Sun Jun 21, 2020 4:04 pm
Forum: The Garage - Technical Forum
Topic: swapping a 1997 engine into a 1995
Replies: 5
Views: 11648

Re: swapping a 1997 engine into a 1995

Sorry I should have been clearer, it's a 2l to 2l. Same engine, just the 97 is so smooth but its body is rusted as heck.

The main thing was to check any immobiliser problems/do I have to bring the ECU with it?
by MikeyG
Sat Jun 20, 2020 11:10 pm
Forum: The Garage - Technical Forum
Topic: swapping a 1997 engine into a 1995
Replies: 5
Views: 11648

swapping a 1997 engine into a 1995

Hey guys, I'm going to pull a beauty of a 97' engine and gearbox and put it into a beauty shell of a 95. Is it a case of disconnect everything, swap, connect everything, woophee? The 95 is the old immobilizer whereas the 97 is the newer one - I'll bypass the old immobilizer but could that cause any ...
by MikeyG
Mon May 25, 2020 10:06 pm
Forum: The Garage - Technical Forum
Topic: Bolt tensile strength
Replies: 2
Views: 6846

Bolt tensile strength

Hey guys,

Maybe a dumb question but I thought it best to confirm here. The bolts with "10" and "8" on their heads represent 10.9 and 8.8 tensile strength respectively right? Its odd they just have a single number as the internet has no trace of them.

Thanks,
by MikeyG
Mon May 25, 2020 10:05 pm
Forum: The Garage - Technical Forum
Topic: Only seen this once before on a Probe !
Replies: 1
Views: 5364

Re: Only seen this once before on a Probe !

My 1995 N reg has Allan Key screws too. (The same ones). My dust shields were in considerably worse condition too! :P
by MikeyG
Wed May 20, 2020 9:11 pm
Forum: The Garage - Technical Forum
Topic: Fuel Filler Neck
Replies: 4
Views: 10043

Re: Fuel Filler Neck

hehe okay thanks!