Item number would be good (or a PM)
Search found 413 matches
- Sat May 23, 2020 9:36 am
- Forum: The Garage - Technical Forum
- Topic: Just used 11mm spanner !
- Replies: 4
- Views: 10030
- Thu May 21, 2020 7:52 pm
- Forum: The Garage - Technical Forum
- Topic: Just used 11mm spanner !
- Replies: 4
- Views: 10030
Re: Just used 11mm spanner !
How did I miss them
- Wed May 20, 2020 8:47 pm
- Forum: The Garage - Technical Forum
- Topic: Fuel Filler Neck
- Replies: 4
- Views: 10040
- Tue May 19, 2020 11:41 am
- Forum: The Garage - Technical Forum
- Topic: Radiator and oil
- Replies: 3
- Views: 8271
Re: Radiator and oil
No, just rinse it off, (spray it with a degeaser) then rinse it off.
24v rad or 16v rad,
Plus depends on what your paying for a secondhand rad,, you can pick up a new 16 v for about £77 and 24v rad for about £106
24v rad or 16v rad,
Plus depends on what your paying for a secondhand rad,, you can pick up a new 16 v for about £77 and 24v rad for about £106
- Tue May 19, 2020 11:20 am
- Forum: The Garage - Technical Forum
- Topic: Cam cover gasket - Drain coolant?
- Replies: 8
- Views: 14688
Re: Cam cover gasket - Drain coolant?
I use RTV sealant
- Sun May 17, 2020 3:56 pm
- Forum: The Garage - Technical Forum
- Topic: Cam cover gasket - Drain coolant?
- Replies: 8
- Views: 14688
Re: Cam cover gasket - Drain coolant?
Hi, no you don't have to drain the collant, but there are water pipe going to the TB which you have to remove and you will get a little bit of water draining out of the lines, I've had my IM off many times and never had to drain the coolant, best thing to do is get rid of the hayne's manual, I never...
- Wed May 13, 2020 8:14 pm
- Forum: The Garage - Technical Forum
- Topic: Ignition Coil
- Replies: 4
- Views: 9833
- Tue May 12, 2020 5:46 pm
- Forum: The Garage - Technical Forum
- Topic: Mysterious Code 13
- Replies: 11
- Views: 22036
Re: Mysterious Code 13
Hope your back gets better quickly, nothing worse then a injured back. Re the FM, put it on the back burner while we are in this situation with the virus, won't pretend that I know how hard it is trying to keep any business afloat these dark days, but I'm sure that you will put your heart and sole i...
- Wed May 06, 2020 3:40 pm
- Forum: The Garage - Technical Forum
- Topic: Clutch
- Replies: 5
- Views: 12845
Re: Clutch
Update, managed to change the clutch master cylinder, but what a job on a 24v. I ended up taking the IM off, much easier than cutting my big fat hands to pieces, off the the old master cylinder and on the the new on, Janice and I bled to he clutch but left it until today to put the IM back on and tr...
- Mon May 04, 2020 7:54 pm
- Forum: The Garage - Technical Forum
- Topic: Clutch
- Replies: 5
- Views: 12845
Clutch
Finally got round to bleed to clutch, with the help from Janice, seemed to get loads of air out of the system, Kept bleeding it even after the air bubbles stopped and got clear fluid. But still a issue, so tomorrow will change the clutch master cylinder. If that doesn't sort out my issues I'll have ...