Search found 238 matches

by mojo98
Sun Nov 29, 2020 6:31 pm
Forum: The Garage - Technical Forum
Topic: Question
Replies: 13
Views: 5179

Question

Right Im looking for a answer to

What is the push on wire for on the 24v Power steering pump. 🤔🤔🤔

Ease to remove😀 but a right job refitting🤪
by mojo98
Fri Nov 27, 2020 3:46 pm
Forum: The Garage - Technical Forum
Topic: Engine/gearbox
Replies: 25
Views: 6711

Re: Engine/gearbox

You could be right, but I want it doing properly and it's not you the engine and gearbox, I've taken of the whole of the front end, Today's work including fitting the bottom engine support, going around the engine mount bolts making sure that I haven't missed anything, changed the a/c catchpot on th...
by mojo98
Wed Nov 25, 2020 6:02 pm
Forum: The Garage - Technical Forum
Topic: Engine/gearbox
Replies: 25
Views: 6711

Re: Engine/gearbox

Managed to get all the engine mounts fitted,
now the hard jobs starts,
power steering pipes fitted to the pump, what a job get the PS pipe support bolt/nut back in
Right and left air bag sensors refitted.
Still mountains of work to do, :D :D
by mojo98
Wed Nov 25, 2020 12:45 pm
Forum: The Garage - Technical Forum
Topic: Engine/gearbox
Replies: 25
Views: 6711

Re: Engine/gearbox

Started putting engine/gearbox back in today, Put the engine/gearbox in position and dropped the car over the engine/gearbox, couple of engine mount installed, and will setup the engine support this afternoon then then lift the car, and try and get all the other engine mounts in (using Duncan's rear...
by mojo98
Sun Nov 22, 2020 12:26 pm
Forum: The Garage - Technical Forum
Topic: Starting issue - maybe!
Replies: 25
Views: 5519

Re: Starting issue - maybe!

Don't know really what to say, it could be petrol related, it's not happen to me But I always turn the key and wait until the warning lights go out,(giving it time to prime up the system) then dip the clutch and without touching the accelerater, only then do I turn the key, And when it doesn't fire...
by mojo98
Sat Nov 21, 2020 6:33 pm
Forum: The Garage - Technical Forum
Topic: Starting issue - maybe!
Replies: 25
Views: 5519

Re: Starting issue - maybe!

Don't know really what to say, it could be petrol related, it's not happen to me But I always turn the key and wait until the warning lights go out,(giving it time to prime up the system) then dip the clutch and without touching the accelerater, only then do I turn the key, And when it doesn't fire ...
by mojo98
Sat Nov 21, 2020 6:13 pm
Forum: The Garage - Technical Forum
Topic: Speedo drive removal
Replies: 5
Views: 1370

Re: Speedo drive removal

Well I've never (touch wood) changed one. But have seen one removed but that was with a big hammer, and guess what :?: It snapped, My suggestion would be remove the fixing both then loads and loads of wd40, then leave it, letting it soak in then with a very thin bladed screw driver, try and ease it ...
by mojo98
Sat Nov 21, 2020 3:02 pm
Forum: The Garage - Technical Forum
Topic: Speedo drive removal
Replies: 5
Views: 1370

Re: Speedo drive removal

No it won't move side to side because it sat on a little stud, once it's above the stud then it will move side to side

Here is a picture of one,


Image
by mojo98
Sat Nov 14, 2020 9:44 am
Forum: The Garage - Technical Forum
Topic: 1994 2.0 not starting
Replies: 18
Views: 4429

Re: 1994 2.0 not starting

As John ask, battery? The other thing you say you have changed the starter motor, did you check it before fitting it,
by mojo98
Thu Nov 12, 2020 10:41 am
Forum: The Garage - Technical Forum
Topic: Cooling fan problems
Replies: 4
Views: 1364

Re: Cooling fan problems

Forget your Haynes manual, it's OK for some things but can't believe everything in it. There is access to electric diagrams in the Oracle, but believe you may have to be a full member to gain access to the Oracle (at a cost of £10 per year). But in the mean time there is only 2 relays, low speed and...