Search found 686 matches
- Fri May 17, 2024 7:03 pm
- Forum: The Garage - Technical Forum
- Topic: Rear calliper/handbrake rebuild
- Replies: 7
- Views: 134
Re: Rear calliper/handbrake rebuild
Winding back, or you risk breaking the mechanism Ooo ok.. I did push back one side so I’ll cross my fingers. One last thing before I’m all set… do you know what size winder I need? Hard to believe my 8 SIDED one doesn’t fit Thanks :) You need an Allen key ( not sure of the size) that fits in to the...
- Fri May 17, 2024 6:52 pm
- Forum: The Garage - Technical Forum
- Topic: Rear calliper/handbrake rebuild
- Replies: 7
- Views: 134
Re: Rear calliper/handbrake rebuild
Winding back, or you risk breaking the mechanism
- Wed May 15, 2024 7:51 pm
- Forum: The Garage - Technical Forum
- Topic: Rear calliper/handbrake rebuild
- Replies: 7
- Views: 134
Re: Rear calliper/handbrake rebuild
Only an Oriental mind could have designed the rear brake assembly. Work or fail is entirely down to the condition of the lip seal around that shaft connected to the handbrake cable. Here it comes Trev. You need to pack your strip of ..............DENSO tape round that shaft to give the lip seal a f...
- Tue May 14, 2024 7:53 am
- Forum: The Garage - Technical Forum
- Topic: Rear calliper/handbrake rebuild
- Replies: 7
- Views: 134
Re: Rear calliper/handbrake rebuild
The piston is wound in and out, by means of the adjuster, which is accessed via the small bolt on the back (12mm head), use an Allen Key to make the adjustments. If you put in the Allen Key and it does nothing, then check that it's actually in there. As for final adjustment, different people have di...
- Mon Apr 29, 2024 3:27 pm
- Forum: The Garage - Technical Forum
- Topic: no start 2.5 24v 1994
- Replies: 5
- Views: 543
Re: no start 2.5 24v 1994
It could be the actual Crank Position Sensor that is faulty.
There is a yeast you can do, which escapes me at present
There is a yeast you can do, which escapes me at present
- Sun Apr 21, 2024 7:14 pm
- Forum: The Garage - Technical Forum
- Topic: 16v Probe not idling, stalls instead
- Replies: 7
- Views: 2237
- Sun Apr 21, 2024 5:22 pm
- Forum: The Garage - Technical Forum
- Topic: 16v Probe not idling, stalls instead
- Replies: 7
- Views: 2237
Re: 16v Probe not idling, stalls instead
I believe that a VAF has already been suggested and I’m sure Duncan has a spare, But if it doing it when hot I would also suggest that the Fizzy is on its way out. If you can get another one to try it’s probably worth it. Im assuming Fizzy was meant to say Dissy? Id have to order another one to see...
- Sun Apr 21, 2024 4:59 pm
- Forum: The Garage - Technical Forum
- Topic: 16v Probe not idling, stalls instead
- Replies: 7
- Views: 2237
Re: 16v Probe not idling, stalls instead
I believe that a VAF has already been suggested and I’m sure Duncan has a spare,
But if it doing it when hot I would also suggest that the Fizzy is on its way out. If you can get another one to try it’s probably worth it.
But if it doing it when hot I would also suggest that the Fizzy is on its way out. If you can get another one to try it’s probably worth it.
- Tue Apr 16, 2024 3:44 pm
- Forum: The Garage - Technical Forum
- Topic: relays
- Replies: 5
- Views: 1304
Re: relays
Do you have any to compare, so you can see where they clip on to, is it the front or sides, then you could use a flat blade screwdriver to help to release them
- Fri Apr 05, 2024 3:46 pm
- Forum: The Garage - Technical Forum
- Topic: No start
- Replies: 18
- Views: 2512
Re: No start
Do you have a spare dizzy that you can try