Search found 782 matches
- Wed Jul 09, 2025 9:25 am
- Forum: The Garage - Technical Forum
- Topic: Diagnosis port abs
- Replies: 2
- Views: 32
Re: Diagnosis port abs
As said on Facebook, You need a 12v LED. Your yellow strap is correct, with the GND port on the left and TBS on the right side of the strap. the wiring for the lamp is wrong, it is currently between TBS and nothing? Once you have a 12v LED the positive side (red if you connect it to the positive leg...
- Mon Jul 07, 2025 9:16 pm
- Forum: The Garage - Technical Forum
- Topic: Exhaust advice
- Replies: 5
- Views: 102
- Mon Jul 07, 2025 8:24 am
- Forum: The Garage - Technical Forum
- Topic: Exhaust advice
- Replies: 5
- Views: 102
Re: Exhaust advice
I believe that the centre pipe is the same size for all, whether it's an early or late car, because, it is the CAT that is different in size based on the manifold and where that ends.
If you can find a different size centre pipe, please post up the links, as it would be useful for others
If you can find a different size centre pipe, please post up the links, as it would be useful for others

- Tue Jun 24, 2025 11:02 am
- Forum: The Garage - Technical Forum
- Topic: ABS fault
- Replies: 14
- Views: 1129
Re: ABS fault
Hi Micron, thought i had placed the black wires as per the instructions given. Appreciate you looking at this, not sure how you figured out it was 11, from the video, as I'm still confused on the pulses/against the chart given :lol: I've done a quick search on E-bay, is this the part you mean: http...
- Tue Jun 24, 2025 7:43 am
- Forum: The Garage - Technical Forum
- Topic: ABS fault
- Replies: 14
- Views: 1129
Re: ABS fault
Hi, it is still difficult to read, but It appears that it could be 11, as the process just is on repeat. You could try to clean around the sensor, new ones are difficult to find. As for the wiring, where you have the 2 black wires together, isn't where I would place them for the ground point, not su...
- Mon Jun 23, 2025 5:59 pm
- Forum: The Garage - Technical Forum
- Topic: ABS fault
- Replies: 14
- Views: 1129
Re: ABS fault
It is very hard to see as the LED isn’t very bright.
If it is possible to get a video when it’s a bit darker that would be great.
Also can I see a picture of your wiring connections?
If it is possible to get a video when it’s a bit darker that would be great.
Also can I see a picture of your wiring connections?
- Mon Jun 23, 2025 4:59 pm
- Forum: The Garage - Technical Forum
- Topic: ABS fault
- Replies: 14
- Views: 1129
- Mon Jun 23, 2025 8:20 am
- Forum: The Garage - Technical Forum
- Topic: ABS fault
- Replies: 14
- Views: 1129
Re: ABS fault
It will loop round.
Look at the 2 links I previously posted.
For details of the codes and how to read them.
Look at the 2 links I previously posted.
For details of the codes and how to read them.
- Thu Jun 12, 2025 8:06 am
- Forum: The Garage - Technical Forum
- Topic: ABS fault
- Replies: 14
- Views: 1129
Re: ABS fault
Bob, speak with Malcolm, he has an OBD1 tester for a Ford Probe
- Wed Jun 11, 2025 8:56 am
- Forum: The Garage - Technical Forum
- Topic: ABS fault
- Replies: 14
- Views: 1129
Re: ABS fault
Do you have a 12v LED attached to the other end of the red and black wires?
Also you have wired everything incorrectly, look at this post https://www.ukpoc.co.uk/forum/viewtopic.php?f=32&t=469 and this one https://www.ukpoc.co.uk/forum/viewtopic.php?f=32&t=2713
Also you have wired everything incorrectly, look at this post https://www.ukpoc.co.uk/forum/viewtopic.php?f=32&t=469 and this one https://www.ukpoc.co.uk/forum/viewtopic.php?f=32&t=2713