Search found 10 matches
- Wed Jul 24, 2024 11:19 am
- Forum: The Garage - Technical Forum
- Topic: Starting
- Replies: 6
- Views: 12903
Re: Starting
If it has been sitting for a while, the old petrol in the tank could be causing issues. Apparently, the ethanol in e10 petrol can absorb a lot of water over time and the petrol itself will be less combustible. Could also try replacing the spark plugs and leads if you haven't done so already? You cou...
- Tue Jul 23, 2024 11:56 pm
- Forum: The Garage - Technical Forum
- Topic: Starting
- Replies: 6
- Views: 12903
Re: Starting
Mine is doing this currently where it will run and splutter a little bit while idling and then when you plant you foot on the accelerator the car tries to cut out and will not rev But you can rev it by gently bringing up the revs I replaced the spark plugs, leads, distributor cap and rotor, fuel fil...
- Tue Jul 23, 2024 11:32 pm
- Forum: The Garage - Technical Forum
- Topic: WANTED - MK2 Probe 2.0L S3 Distributor
- Replies: 4
- Views: 10671
Re: WANTED - MK2 Probe 2.0L S3 Distributor
I managed to order a new one from Ignition Car Parts Ultra Spark is the manufacturer The product code for the S3 distributor on a 2.0L v16 Probe is PD4002N If anyone else is looking for one here is the link: https://www.ignitioncarparts.co.uk/PartDetails.aspx?s_pc=PD4002N They also sell S1 distribut...
- Mon Jul 22, 2024 2:07 pm
- Forum: The Garage - Technical Forum
- Topic: WANTED - MK2 Probe 2.0L S3 Distributor
- Replies: 4
- Views: 10671
Re: WANTED - MK2 Probe 2.0L S3 Distributor
@andy p thanks!
- Mon Jul 22, 2024 1:42 pm
- Forum: The Garage - Technical Forum
- Topic: WANTED - MK2 Probe 2.0L S3 Distributor
- Replies: 4
- Views: 10671
WANTED - MK2 Probe 2.0L S3 Distributor
Hi all,
Does anyone have an S3 distributor for a 96 2.0L Probe, or know where I could get a new one?
I think the Mitsubishi number is T2T57971
Also where can new members join the members only section on here? I can't find where to join anywhere.
Thanks
John
Does anyone have an S3 distributor for a 96 2.0L Probe, or know where I could get a new one?
I think the Mitsubishi number is T2T57971
Also where can new members join the members only section on here? I can't find where to join anywhere.
Thanks
John
- Fri Apr 19, 2024 12:05 pm
- Forum: The Garage - Technical Forum
- Topic: Fuel filter
- Replies: 5
- Views: 9194
Re: Fuel filter
Hi CharlesUK, I actually managed to get a fuel filter from my local Motor Factors. Here are the OEM numbers I have for the fuel filter for my 1996 2.0L v16 Probe F32Z-9155-A 3397051 (I got this number from my local Ford main dealer) Be careful though, if your's is the v24 2.5L V6 then this filter ma...
- Fri Apr 19, 2024 12:00 pm
- Forum: The Garage - Technical Forum
- Topic: Sourcing 1996 v16 Distributor Parts
- Replies: 5
- Views: 7263
Re: Sourcing 1996 v16 Distributor Parts
Hi Tott61, Apologies, I did not see your reply until now. I managed to get the cap and rotor together in a set from RockAuto, I wasn't sure if the rotor would fit but it did so I'm good for the rotor. I actually got the set from the Mazda 626 section. Very handy to know that the same engine is used ...
- Fri Apr 05, 2024 2:45 pm
- Forum: The Garage - Technical Forum
- Topic: Sourcing 1996 v16 Distributor Parts
- Replies: 5
- Views: 7263
Re: Sourcing 1996 v16 Distributor Parts
So an update on trying to source these parts, It seems like RockAuto are showing the wrong cap and rotor for the 1996 2.0l v16 Ford Probe. I have opened my one and there are numbers on it but I cannot seem to find the exact replacement parts. Number on cap: T713 Number on Rotor:T239 Here are images ...
- Thu Apr 04, 2024 11:48 am
- Forum: The Garage - Technical Forum
- Topic: Sourcing 1996 v16 Distributor Parts
- Replies: 5
- Views: 7263
Re: Sourcing 1996 v16 Distributor Parts
This is really helpful thank you!
Rock Auto seems to be a great source. I have found a rotor on there and will take mine out to check against the picture.
Thank you, much appreciated!
I will give an update when I can check!
Rock Auto seems to be a great source. I have found a rotor on there and will take mine out to check against the picture.
Thank you, much appreciated!
I will give an update when I can check!
- Wed Apr 03, 2024 9:16 pm
- Forum: The Garage - Technical Forum
- Topic: Sourcing 1996 v16 Distributor Parts
- Replies: 5
- Views: 7263
Sourcing 1996 v16 Distributor Parts
Ford Probe 2.0L 16v 1996 Hi All, I am trying to source a distributor cap and rotor arm for my v16 Probe. I think I have found the distributor cap but I cannot check it against the OEM number that my local Ford Dealership gave me (3903067). The cap I found is the BOSCH GM815. It looks the exact same ...