Search found 77 matches

by KEG
Mon Jul 14, 2025 5:44 pm
Forum: The Garage - Technical Forum
Topic: HT leads and rad hose
Replies: 4
Views: 61

Re: HT leads and rad hose

Ok thanks.
by KEG
Mon Jul 14, 2025 3:03 pm
Forum: The Garage - Technical Forum
Topic: HT leads and rad hose
Replies: 4
Views: 61

Re: HT leads and rad hose

Hi
Don’t mind the hose being a used one.
How much for both?
by KEG
Mon Jul 14, 2025 10:57 am
Forum: The Garage - Technical Forum
Topic: HT leads and rad hose
Replies: 4
Views: 61

HT leads and rad hose

Anyone got a set of HT spark plug leads and a top radiator hose for a Probe 1996 2.5 24v.
Image
by KEG
Sun Jul 13, 2025 2:14 pm
Forum: The Garage - Technical Forum
Topic: rough idle
Replies: 2
Views: 112

Re: rough idle

Thanks
by KEG
Sat Jul 12, 2025 8:36 am
Forum: The Garage - Technical Forum
Topic: rough idle
Replies: 2
Views: 112

rough idle

My Probe has a tough idle after head gasket job done. Had a new aluminium radiator fitted recently as well. Full service done.
Had a problem with the idle control valve years ago. Any suggestions? 1996 2.5v.
by KEG
Tue Jun 10, 2025 6:18 pm
Forum: The Garage - Technical Forum
Topic: Radiator needed urgently
Replies: 2
Views: 455

Re: Radiator needed urgently

Thanks
by KEG
Tue Jun 10, 2025 5:33 pm
Forum: The Garage - Technical Forum
Topic: Radiator needed urgently
Replies: 2
Views: 455

Radiator needed urgently

I need a radiator for my Probe 24v 2.5 1996. Tried everywhere but can’t source one. Had the head gaskets done and fitted a second hand rad which wasn’t any good as it’s leaking.

If anyone has a good working second hand one it would be appreciated.

Thanks
Steve
by KEG
Fri Mar 21, 2025 6:22 am
Forum: The Garage - Technical Forum
Topic: Head Gaskets
Replies: 6
Views: 687792

Re: Head Gaskets

I’ve had a look on there. There are several bolts listed can you point m in the right direction to which ones fit? Do these parts come from the USA? I’ve also looked on Autodoc for the head gasket set plus the bolts. They seem to be available if pricey. Again not sure which bolts are the right size....
by KEG
Wed Mar 19, 2025 10:45 pm
Forum: The Garage - Technical Forum
Topic: Head Gaskets
Replies: 6
Views: 687792

Re: Head Gaskets

Don’t know. Will find out.
At the moment the garage is sourcing a head gasket set and of course the bolts. These will have to probably come separate from the gasket set. Don’t know. Hopefully they are available.
by KEG
Wed Mar 19, 2025 3:48 pm
Forum: The Garage - Technical Forum
Topic: Head Gaskets
Replies: 6
Views: 687792

Re: Head Gaskets

Hi As far as I can gather it’s this. If exhaust gases are present, the test fluid will “sniff” the gases as they are pulled through the fluid. If the blue fluid turns yellow or green, exhaust gases are leaking into the coolant system, and a head gasket repair is required. If fluid remains blue, exha...