Search found 69 matches

by Andy kay93
Sun Jul 24, 2022 8:44 pm
Forum: The Garage - Technical Forum
Topic: IGN barrel
Replies: 6
Views: 3123

Re: IGN barrel

Ok problem solved, a bit of help from mr codge odery Basically transferred ring and gubbings onto earlier ign barrel using a bit of black insulation tape, cut and rejoined green wires Going to electrical plug, put back together and using an old key Top part(with chip in) against new key( non chipped...
by Andy kay93
Sun Jul 24, 2022 2:18 pm
Forum: The Garage - Technical Forum
Topic: IGN barrel
Replies: 6
Views: 3123

Re: IGN barrel

Image
Image
by Andy kay93
Sun Jul 24, 2022 1:47 pm
Forum: The Garage - Technical Forum
Topic: IGN barrel
Replies: 6
Views: 3123

IGN barrel

Hi all I’ve had a difficult ign barrel for quite a while and I’ve decided to change, has anyone managed to remove barrel from Lock? Seem to be brass pins holding it in, I’ve got the whole shaft But there is a difference at the barrel end where the immobiliser Ring fits, basically mine has a black ri...
by Andy kay93
Mon Apr 26, 2021 1:59 pm
Forum: The Garage - Technical Forum
Topic: Keyless entry
Replies: 14
Views: 18025

Re: Keyless entry

Hi trever, yes I have power to module, and when I press Lock and unlock on remote, I have power to white and white/ black because I’ve used the positive trigger wiring diagram, I don’t know if this is the correct wiring diagram to use And I don’t know where to connect white & white/ black if it is A...
by Andy kay93
Mon Apr 26, 2021 12:23 pm
Forum: The Garage - Technical Forum
Topic: Keyless entry
Replies: 14
Views: 18025

Re: Keyless entry

Hi Trevor, yes I’ve got that bit working just the connection to lock and unlock central locking is required
Andy k
by Andy kay93
Sun Apr 25, 2021 9:27 pm
Forum: The Garage - Technical Forum
Topic: Keyless entry
Replies: 14
Views: 18025

Re: Keyless entry

Great thanks Trevor, 👍🏻
by Andy kay93
Sun Apr 25, 2021 8:44 pm
Forum: The Garage - Technical Forum
Topic: Keyless entry
Replies: 14
Views: 18025

Re: Keyless entry

Hi Trevor, also found this posted by scooby
But it doesn’t show where white, white/black wires go

Image
by Andy kay93
Sun Apr 25, 2021 8:24 pm
Forum: The Garage - Technical Forum
Topic: Keyless entry
Replies: 14
Views: 18025

Re: Keyless entry

Hi Trevor,
Sending pictures, thank you 😬
Image

Image
by Andy kay93
Sun Apr 25, 2021 7:12 pm
Forum: The Garage - Technical Forum
Topic: Keyless entry
Replies: 14
Views: 18025

Keyless entry

Hi all, so bought a cheap Chinese keyless entry kit from eBay, and got the probe in pieces trying to fit it, I believe I need to fit a resistor somewhere, does any body know How to fit these as I haven’t got a clue, at the moment I have A white and a white/black wire from the keyless system And I’ve...
by Andy kay93
Thu Jan 02, 2020 2:20 pm
Forum: The Garage - Technical Forum
Topic: Broken pipe/egr
Replies: 8
Views: 16747

Re: Broken pipe/egr

Hi kit,
Just paid you via PayPal
Thanks
Andy