Search found 69 matches
- Sun Jul 24, 2022 8:44 pm
- Forum: The Garage - Technical Forum
- Topic: IGN barrel
- Replies: 6
- Views: 7019
Re: IGN barrel
Ok problem solved, a bit of help from mr codge odery Basically transferred ring and gubbings onto earlier ign barrel using a bit of black insulation tape, cut and rejoined green wires Going to electrical plug, put back together and using an old key Top part(with chip in) against new key( non chipped...
- Sun Jul 24, 2022 2:18 pm
- Forum: The Garage - Technical Forum
- Topic: IGN barrel
- Replies: 6
- Views: 7019
- Sun Jul 24, 2022 1:47 pm
- Forum: The Garage - Technical Forum
- Topic: IGN barrel
- Replies: 6
- Views: 7019
IGN barrel
Hi all I’ve had a difficult ign barrel for quite a while and I’ve decided to change, has anyone managed to remove barrel from Lock? Seem to be brass pins holding it in, I’ve got the whole shaft But there is a difference at the barrel end where the immobiliser Ring fits, basically mine has a black ri...
- Mon Apr 26, 2021 1:59 pm
- Forum: The Garage - Technical Forum
- Topic: Keyless entry
- Replies: 14
- Views: 26160
Re: Keyless entry
Hi trever, yes I have power to module, and when I press Lock and unlock on remote, I have power to white and white/ black because I’ve used the positive trigger wiring diagram, I don’t know if this is the correct wiring diagram to use And I don’t know where to connect white & white/ black if it is A...
- Mon Apr 26, 2021 12:23 pm
- Forum: The Garage - Technical Forum
- Topic: Keyless entry
- Replies: 14
- Views: 26160
Re: Keyless entry
Hi Trevor, yes I’ve got that bit working just the connection to lock and unlock central locking is required
Andy k
Andy k
- Sun Apr 25, 2021 9:27 pm
- Forum: The Garage - Technical Forum
- Topic: Keyless entry
- Replies: 14
- Views: 26160
Re: Keyless entry
Great thanks Trevor, 
- Sun Apr 25, 2021 8:44 pm
- Forum: The Garage - Technical Forum
- Topic: Keyless entry
- Replies: 14
- Views: 26160
Re: Keyless entry
Hi Trevor, also found this posted by scooby
But it doesn’t show where white, white/black wires go
But it doesn’t show where white, white/black wires go
- Sun Apr 25, 2021 8:24 pm
- Forum: The Garage - Technical Forum
- Topic: Keyless entry
- Replies: 14
- Views: 26160
Re: Keyless entry
Hi Trevor,
Sending pictures, thank you
Sending pictures, thank you
- Sun Apr 25, 2021 7:12 pm
- Forum: The Garage - Technical Forum
- Topic: Keyless entry
- Replies: 14
- Views: 26160
Keyless entry
Hi all, so bought a cheap Chinese keyless entry kit from eBay, and got the probe in pieces trying to fit it, I believe I need to fit a resistor somewhere, does any body know How to fit these as I haven’t got a clue, at the moment I have A white and a white/black wire from the keyless system And I’ve...
- Thu Jan 02, 2020 2:20 pm
- Forum: The Garage - Technical Forum
- Topic: Broken pipe/egr
- Replies: 8
- Views: 20689
Re: Broken pipe/egr
Hi kit,
Just paid you via PayPal
Thanks
Andy
Just paid you via PayPal
Thanks
Andy