Search found 12 matches

by Rikki5
Wed Dec 11, 2019 11:11 pm
Forum: The Garage - Technical Forum
Topic: Code 51
Replies: 14
Views: 30547

Re: Code 51

Hi can you tell me the details of part ordered off Amazon as have a module to fix and don't know where to get the fuse cheers.
by Rikki5
Sun Nov 10, 2019 6:04 pm
Forum: The Garage - Technical Forum
Topic: iac valve
Replies: 1
Views: 5585

iac valve

Hi all still no joy with the hi idle have removed and cleaned throttle body and iac valve .but the Haynes manual says you remove two screw to get at valve but I had to take off the bottom of throttle body four screws see photos valve moves with hot water and moves back with cold about 5mm movement i...
by Rikki5
Sun Nov 10, 2019 5:51 pm
Forum: The Garage - Technical Forum
Topic: high idle 1200 odds 24v
Replies: 7
Views: 14530

Re: high idle 1200 odds 24v

Hi cleaned throttle body took iac valve off and tried some boiling water in it valve moves and moves back when cold water is poured in moves about 5mm is this about right as have it all back together and still 1200 idle any other ideas as what to do next cheers in advance.
by Rikki5
Sat Nov 02, 2019 6:48 pm
Forum: The Garage - Technical Forum
Topic: high idle 1200 odds 24v
Replies: 7
Views: 14530

Re: high idle 1200 odds 24v

Hi idle goes to around 1000 rpm will take off throttle body and clean it and iac valve.cheers
Does cleaning normally work or should I get a replacment.
by Rikki5
Sat Nov 02, 2019 5:35 pm
Forum: The Garage - Technical Forum
Topic: high idle 1200 odds 24v
Replies: 7
Views: 14530

Re: high idle 1200 odds 24v

Hi CPT when in test mode as soon as you move throttle fans come on go off when release throttle .what is involved in cleaning the throttle body do I just spraywith carb cleaner and wipe clean can I use air pressure to blow through parts .
by Rikki5
Sat Nov 02, 2019 11:57 am
Forum: The Garage - Technical Forum
Topic: high idle 1200 odds 24v
Replies: 7
Views: 14530

high idle 1200 odds 24v

Hi all on from repairing the engine fire damage car now idles at 1250 rpm idle screw all way in (adjusted in test mode) changed MAF unit (thanks Malc) coolant is spot on now thinking throttle body may need cleaned .what is involved in this and any special things ineex to look out for (how do you cle...
by Rikki5
Wed Oct 23, 2019 7:20 pm
Forum: The Garage - Technical Forum
Topic: code 11 showing
Replies: 2
Views: 7320

code 11 showing

Hi all after sorting the engine fire damage (injection rails and loom repairs) the car is idealing at 1000 rpm before was a steady 750 pull codes showing code 11 to intake sensor so can I do anything to sort this or is a replacment unit required if so has anyone got one for sale posted to Glasgow le...
by Rikki5
Mon Sep 30, 2019 9:05 pm
Forum: The Garage - Technical Forum
Topic: parts req due engine fire.
Replies: 5
Views: 13509

Re: parts req due engine fire.

Hi CPT the parts I need are both injection electrical rails and the loom that comes from them all the way into the interior of car (would be willing to take just the two electrical plugs and the rails if you would be willing to cut them off with a length of the loom attached ) cheers
by Rikki5
Thu Sep 26, 2019 9:59 pm
Forum: The Garage - Technical Forum
Topic: parts req due engine fire.
Replies: 5
Views: 13509

parts req due engine fire.

Hi can anyone help need under bonnet wireing and probably some other bits have tried to upload photos no joy .any advise on getting parts would be good cheers.
by Rikki5
Fri Feb 01, 2019 10:18 pm
Forum: The Garage - Technical Forum
Topic: Air bag light code 51
Replies: 6
Views: 13400

Re: Air bag light code 51

Ok think I will remove the faulty fuse and visit some shops to see if they can help will let u know if I get some fuses .