For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
Budz59
- Registered User
- Posts: 37
- Joined: Fri Feb 22, 2019 4:48 pm
- Has thanked: 1 time
- Been thanked: 1 time
Post
by Budz59 » Mon Jul 01, 2024 6:07 pm
My 1997 16V has what appears to be a serious issue, excessive white smoke from exhaust and misfiring , mechanic ( used to working on newer cars ) has removed plugs which were wet with fuel and he is telling me there is fuel on top of pistons . car is not burning oil ,it had an oil change and filter a couple months ago . It has had a pressure test done and all was ok with that . Any pointers as to what to look at please ?
Thanks
Budz
-
Micron
- Site Admin
- Posts: 3293
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 59 times
- Been thanked: 89 times
Post
by Micron » Mon Jul 01, 2024 6:59 pm
Do you have excessive fuel on top of all of the pistons, or just one? Do you know if you are getting a spark at every plug? Are you loosing any water?
Admin and Owner of this fine club
![😎](//twemoji.maxcdn.com/2/svg/1f60e.svg)
-
jrh
- Full Member
- Posts: 1012
- Joined: Thu Sep 20, 2018 3:08 pm
- Been thanked: 43 times
Post
by jrh » Mon Jul 01, 2024 7:37 pm
Check radiator coolant level.
Fill up when cold.
Leave cap off , get someone to start engine while you look for lots of bubbles coming out of the water.
If so , head gasket gone.
-
Budz59
- Registered User
- Posts: 37
- Joined: Fri Feb 22, 2019 4:48 pm
- Has thanked: 1 time
- Been thanked: 1 time
Post
by Budz59 » Mon Jul 01, 2024 9:06 pm
Head Gasket checks been done at garage and all ok , 2 plugs and top of 2 pistons wet with fuel ..
-
Micron
- Site Admin
- Posts: 3293
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 59 times
- Been thanked: 89 times
Post
by Micron » Mon Jul 01, 2024 10:09 pm
Budz59 wrote: ↑Mon Jul 01, 2024 9:06 pm
Head Gasket checks been done at garage and all ok , 2 plugs and top of 2 pistons wet with fuel ..
And sparks, are the pots that have fuel in them sparking?
Admin and Owner of this fine club
![😎](//twemoji.maxcdn.com/2/svg/1f60e.svg)
-
Budz59
- Registered User
- Posts: 37
- Joined: Fri Feb 22, 2019 4:48 pm
- Has thanked: 1 time
- Been thanked: 1 time
Post
by Budz59 » Tue Jul 02, 2024 8:56 am
Still spark at the 2 ports mentioned , no coolant loss , not burning oil … starts but is rough and misfires
-
Micron
- Site Admin
- Posts: 3293
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 59 times
- Been thanked: 89 times
Post
by Micron » Tue Jul 02, 2024 9:16 am
You may find that the plug leads need replacing, as they might be breaking down under load. Sometimes you have to start with the basics.
Do you know if the white "smoke" is a water vapour or Oil smoke?
Admin and Owner of this fine club
![😎](//twemoji.maxcdn.com/2/svg/1f60e.svg)
-
jrh
- Full Member
- Posts: 1012
- Joined: Thu Sep 20, 2018 3:08 pm
- Been thanked: 43 times
Post
by jrh » Tue Jul 02, 2024 10:54 am
For what little effort it will take , you do the bubble /start up check.
Just to be sure.
-
Micron
- Site Admin
- Posts: 3293
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 59 times
- Been thanked: 89 times
Post
by Micron » Tue Jul 02, 2024 11:09 am
Admin and Owner of this fine club
![😎](//twemoji.maxcdn.com/2/svg/1f60e.svg)
-
mojo98
- Tech Rep
- Posts: 2606
- Joined: Thu Sep 06, 2018 10:52 pm
- Has thanked: 41 times
- Been thanked: 55 times
Post
by mojo98 » Tue Jul 02, 2024 3:32 pm
check the catalytic converter, I remember somebody have a lot of white smoke and no running good and when we check the cat was solid.
just a thought
Who is online
Users browsing this forum: No registered users and 5 guests