Emails sent
Top tip. After cutting out the templates, and fitted to boot lid, offer up the spoiler and check that the fixing match up the X marks on the template before drilling,
And the other thing to check before drilling open the boot lid and check that you have large holes with rubber bungs on the underside of the boot lid, to enable you to fit the nuts the the bolts on the spoiler once fitted to the boot lid.
No all boot lids have the pre drilled holes on the underside
Spoiler
-
notoriousgoz
- Full Member
- Posts: 157
- Joined: Thu Sep 06, 2018 9:34 pm
- Has thanked: 29 times
- Been thanked: 1 time
-
mojo98
- Tech Rep
- Posts: 2549
- Joined: Thu Sep 06, 2018 10:52 pm
- Has thanked: 38 times
- Been thanked: 51 times
Re: Spoiler
Anybody thinking of fitting a spoiler to the boot lid, make sure that you have these two predrilled hole on the underside of the boot lid, if not either don't fit a spoiler or get a big drill bit to make some holes to allow you of fasten to spoiler to the boot lid
1
No all boot lids have these predrilled holes on the underside
1
No all boot lids have these predrilled holes on the underside
-
Kit
- Tech Rep
- Posts: 3418
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 67 times
- Been thanked: 106 times
Re: Spoiler
Late cars only have these access bung for the spoliers fixingsmojo98 wrote: ↑Sat Oct 21, 2023 1:37 pmAnybody thinking of fitting a spoiler to the boot lid, make sure that you have these two predrilled hole on the underside of the boot lid, if not either don't fit a spoiler or get a big drill bit to make some holes to allow you of fasten to spoiler to the boot lid
1
No all boot lids have these predrilled holes on the underside
Kit
-
mojo98
- Tech Rep
- Posts: 2549
- Joined: Thu Sep 06, 2018 10:52 pm
- Has thanked: 38 times
- Been thanked: 51 times
Re: Spoiler
Plus Crossover's MrP (M Reg)Kit wrote: ↑Sat Oct 21, 2023 1:45 pmLate cars only have these access bung for the spoliers fixingsmojo98 wrote: ↑Sat Oct 21, 2023 1:37 pmAnybody thinking of fitting a spoiler to the boot lid, make sure that you have these two predrilled hole on the underside of the boot lid, if not either don't fit a spoiler or get a big drill bit to make some holes to allow you of fasten to spoiler to the boot lid
1
No all boot lids have these predrilled holes on the underside
Kit
-
Wolfie
- Full Member
- Posts: 57
- Joined: Wed May 31, 2023 3:57 pm
- Has thanked: 2 times
- Been thanked: 3 times
Re: Spoiler
Better dig my hole cutting drill bits out...mojo98 wrote: ↑Sat Oct 21, 2023 1:37 pmAnybody thinking of fitting a spoiler to the boot lid, make sure that you have these two predrilled hole on the underside of the boot lid, if not either don't fit a spoiler or get a big drill bit to make some holes to allow you of fasten to spoiler to the boot lid
1
No all boot lids have these predrilled holes on the underside
Would you say the holes are about 50mm.
Who is online
Users browsing this forum: No registered users and 243 guests