For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
mr moo
- Full Member
- Posts: 71
- Joined: Tue Sep 11, 2018 9:50 am
- Has thanked: 15 times
- Been thanked: 4 times
Post
by mr moo » Tue Jun 13, 2023 7:23 am
Hi all, I'm after a few ideas on why my rear suspension is so hard. Shocks seem ok, no leaks, it is lowered about 20mm, but my old probe was lowered this much and wasn't as bad.
More noticeable over sharp ruts in the road/ the odd unavoidable pothole. Almost like it's riding on the bump-stops, but it isn't.
I've gotten used to it but it's been on my to-do list for years.
Is it possible that the standard shock absorbers are to far down their travel? Any ideas welcome
Neil
-
cpt black
- Tech Rep
- Posts: 2701
- Joined: Fri Sep 07, 2018 8:28 am
- Has thanked: 11 times
- Been thanked: 85 times
Post
by cpt black » Wed Jun 14, 2023 12:53 pm
Could well be the rear shocks are gone and only the springs are compensating the bounce
at the rear
-
mr moo
- Full Member
- Posts: 71
- Joined: Tue Sep 11, 2018 9:50 am
- Has thanked: 15 times
- Been thanked: 4 times
Post
by mr moo » Wed Jun 14, 2023 2:45 pm
It doesn't bounce uncontrollably but the shocks may have weakened
Who is online
Users browsing this forum: No registered users and 183 guests