Page 1 of 1

NSF indicator issue

Posted: Mon May 08, 2023 10:34 am
by Micron
On my way home yesterday I noticed that the NSF indicators ( side repeater and front indicator ) stopped working.
I have checked both bulbs and put a meter on the circuit to see if I was getting any voltage, but nothing.
If you look at the attached diagram you will see a common point which is described as Interior Fuse Panel, but not an actual fuse?
The rear indicator works, so my thinking is that it must be an issue at this common point.
My question is where is this common point if it’s not a fuse?
Image

Re: NSF indicator issue

Posted: Mon May 08, 2023 11:39 am
by cpt black
When i had the same problem Trev it was the 3 pinnned loom grey connector plug
Image

Re: NSF indicator issue

Posted: Mon May 08, 2023 11:58 am
by Micron
Did that affect both lights?

Re: NSF indicator issue

Posted: Mon May 08, 2023 12:57 pm
by cpt black
Mine was just the earth on the Front mate

Re: NSF indicator issue

Posted: Mon May 08, 2023 1:18 pm
by Micron
cpt black wrote:
Mon May 08, 2023 12:57 pm
Mine was just the earth on the Front mate
I did test the positive feed with a meter straight to the negative and f the battery with the indicator going, but nothing

Re: NSF indicator issue

Posted: Tue May 09, 2023 1:00 pm
by Micron
Problem resolved, either by luck or intervention?
I pinpointed the Interior Fuse Panel plug to C1, which is at the back of the interior fuse panel strangely enough :lol: , I gave it a bit of a waggle and all's good (for now)

Re: NSF indicator issue

Posted: Tue May 09, 2023 7:11 pm
by Kit
Micron wrote:
Tue May 09, 2023 1:00 pm
Problem resolved, either by luck or intervention?
I pinpointed the Interior Fuse Panel plug to C1, which is at the back of the interior fuse panel strangely enough :lol: , I gave it a bit of a waggle and all's good (for now)
Simple things are always the fixes :lol:
My suggest, would have been the earth connections

Kit

Re: NSF indicator issue

Posted: Tue May 09, 2023 10:04 pm
by Micron
Kit wrote:
Tue May 09, 2023 7:11 pm
Micron wrote:
Tue May 09, 2023 1:00 pm
Problem resolved, either by luck or intervention?
I pinpointed the Interior Fuse Panel plug to C1, which is at the back of the interior fuse panel strangely enough :lol: , I gave it a bit of a waggle and all's good (for now)
Simple things are always the fixes :lol:
My suggest, would have been the earth connections

Kit
I agree it’s a possibility, but in this case I tested the 12v coming to the lights with a meter between the supply and the negative terminal on the battery which bypasses the earth terminal.

Re: NSF indicator issue

Posted: Wed May 10, 2023 1:00 pm
by cpt black
Well done Trev great news ;)