Flexible brake pipes.

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Tott61
Full Member
Posts: 75
Joined: Tue May 11, 2021 7:14 pm
Been thanked: 1 time

Flexible brake pipes.

Post by Tott61 » Sun Oct 10, 2021 7:24 pm

Ford probe 2.0 1994

I am trying to replace the rear Flexi break pipes. Once you have removed the clips I assume the
pipe should pull out. Mine appear to be corroded to the mounts is there a way to remove these other than brute strength. Also the flare nut which connects the steel pipe to the Flexi is corroded. Is there any advice re undoing without damaging it.

Kit
Tech Rep
Posts: 2065
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 22 times
Been thanked: 31 times

Re: Flexible brake pipes.

Post by Kit » Sun Oct 10, 2021 8:15 pm

Hint :- you have to free the flexi pile from the Mount, then undo the flexi hose from the metal pipe, after cleaning & applying a release agent, WD-40 etc
Turn the flex pipe, (17mm spanner), & hold the flare nut with a 10mm ‘brake spanner’

Kit

Can you PM me your address, please

Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests