Airbag light

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Sunfly
Full Member
Posts: 993
Joined: Fri Sep 07, 2018 9:11 am
Been thanked: 21 times

Re: Airbag light

Post by Sunfly » Tue Sep 11, 2018 6:44 pm

Donner1 wrote:
Tue Sep 11, 2018 3:21 pm
I pulled the connector behind glove box and cleaned it. Light has gone out for now.
I think you've sorted it. Code 33 is the passenger air bag and the circuit is very simple, just the airbab with its shorting bar and the joint connector you pulled. Connector is most likely as its know to be a common fault.

Happy motoring!

Bob.

Donner1
Registered User
Posts: 125
Joined: Fri Sep 07, 2018 9:27 am

Re: Airbag light

Post by Donner1 » Tue Sep 11, 2018 8:17 pm

Many thanks for the help

Sunfly
Full Member
Posts: 993
Joined: Fri Sep 07, 2018 9:11 am
Been thanked: 21 times

Re: Airbag light

Post by Sunfly » Wed Sep 12, 2018 7:21 am

Chris-A wrote:
Tue Sep 11, 2018 10:13 am
I have a similar problem. Code 33 seams to be Pin 7 not grounded at DM. What is DM ? Anyone
DM is Diagnostic Monitor (or module to us) and for 33 its looking for a resistance of 0.9 to 1.1 ohms across pins 9 and 11 when the ignition is turned to ON. Above 4 ohms and you get 33 flashing. I'd check the connector first as per Donner's post.
Good luck.

Meadlo
Registered User
Posts: 269
Joined: Thu Sep 06, 2018 8:55 pm
Has thanked: 1 time

Re: Airbag light

Post by Meadlo » Wed Sep 12, 2018 7:40 am

Will do. Fingers crossed 🤞

Post Reply

Who is online

Users browsing this forum: No registered users and 43 guests