rear track control arm

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
paulinpoole
Full Member
Posts: 131
Joined: Sun Sep 16, 2018 6:16 pm

rear track control arm

Post by paulinpoole » Sun Oct 18, 2020 6:04 pm

im needing one of these as one of the bolts sheared off :roll: not urgent tho
Is this the correct part for our cars as its a mazda number 0525 GE
ebay item no 193525962653
or has someone got the ford number please
thanks in advance 8-)

mojo98
Tech Rep
Posts: 2531
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 32 times
Been thanked: 51 times

Re: rear track control arm

Post by mojo98 » Sun Oct 18, 2020 7:54 pm

Paul, are you looking from a trailing arm, (runs back to front) and hand brake cables fasten's to
No 11 trailing arm

Or rear lateral bars (runs from side to side)
No 5 lateral bar
Ford number from trailing arm F32Z5J898A but discontinued


Image

MikeyG
Full Member
Posts: 93
Joined: Thu Nov 29, 2018 6:01 pm
Has thanked: 1 time

Re: rear track control arm

Post by MikeyG » Sun Oct 18, 2020 8:12 pm

All the control arms are interchangeable with the 626 ge right?

paulinpoole
Full Member
Posts: 131
Joined: Sun Sep 16, 2018 6:16 pm

Re: rear track control arm

Post by paulinpoole » Mon Oct 19, 2020 9:09 pm

MikeyG wrote:
Sun Oct 18, 2020 8:12 pm
All the control arms are interchangeable with the 626 ge right?
thats what i was thinking :)

paulinpoole
Full Member
Posts: 131
Joined: Sun Sep 16, 2018 6:16 pm

Re: rear track control arm

Post by paulinpoole » Fri Oct 23, 2020 9:10 pm

mojo98 wrote:
Sun Oct 18, 2020 7:54 pm
Paul, are you looking from a trailing arm, (runs back to front) and hand brake cables fasten's to
No 11 trailing arm

Or rear lateral bars (runs from side to side)
No 5 lateral bar
Ford number from trailing arm F32Z5J898A but discontinued


Image
malc it is the trailing arm i want,no 11,my boob :?
any idea if this would fit being a mazda GE part ?
thanks 8-)

jrh
Full Member
Posts: 959
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 36 times

Re: rear track control arm

Post by jrh » Sat Oct 24, 2020 8:27 am

Don't throw the old one away !
To remove old bushes , just run a fine hacksaw cut along the 'cylinder' enclosing the bush.
A screwdriver in the gap, prise it open , tap old bush out.
Now you have a choice if you cannot find the proper item.
The cheap items from Latvia have good bushes which can be welded into your old trailing arm.

cpt black
Tech Rep
Posts: 2666
Joined: Fri Sep 07, 2018 8:28 am
Has thanked: 11 times
Been thanked: 82 times

Re: rear track control arm

Post by cpt black » Sat Oct 24, 2020 9:16 am

When you say bolt sheared off do you mean the bolts that hold the handbrake
cable on to the arm :?: if so just tack weld a m6 bolt on or cable tie on

paulinpoole
Full Member
Posts: 131
Joined: Sun Sep 16, 2018 6:16 pm

Re: rear track control arm

Post by paulinpoole » Sun Oct 25, 2020 12:15 pm

hiya,yes one of the handbrake bolts sheared off,even tho i wd40 and wire brushed it first :roll:
luckily one is still on there holding cable in place,so yes thanks i will use a cable tie as dont have access to a weld
cheers mate 8-)

Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests