long screw driver to check top dead center/ rear plug left hand plug/ remove and use
crankshaft bolt to turn to fully up and rotor arm should point no1 on dissy ,1 repeat till
dissy/no,1 crank should read 10/12 top dead center
Search found 629 matches
- Thu Dec 20, 2018 1:27 pm
- Forum: The Garage - Technical Forum
- Topic: Won't start..
- Replies: 82
- Views: 151953
- Thu Dec 20, 2018 10:24 am
- Forum: The Garage - Technical Forum
- Topic: Won't start..
- Replies: 82
- Views: 151953
Re: Won't start..
have you checked the battery in the fob replaced
- Thu Dec 20, 2018 9:58 am
- Forum: The Garage - Technical Forum
- Topic: Won't start..
- Replies: 82
- Views: 151953
Re: Won't start..
Back to basic,s do you have a key fob to start the car OEM one
Any aftermarket alarms etc added
Any aftermarket alarms etc added
- Tue Dec 18, 2018 4:12 pm
- Forum: The Garage - Technical Forum
- Topic: Won't start..
- Replies: 82
- Views: 151953
Re: Won't start..
As said clean the plug,(YOU CAN DO IT) it has a small tab just pull when activated
- Mon Dec 17, 2018 3:11 pm
- Forum: The Garage - Technical Forum
- Topic: Won't start..
- Replies: 82
- Views: 151953
Re: Won't start..
Could be the alternator taking power form the starter motor try jumping the car
with some leads
with some leads
- Sat Dec 15, 2018 6:26 am
- Forum: The Garage - Technical Forum
- Topic: Won't start..
- Replies: 82
- Views: 151953
Re: Won't start..
If a 2.5 check the Grey CPS plug by the top of the
dipstick
dipstick
- Tue Dec 11, 2018 4:48 pm
- Forum: The Garage - Technical Forum
- Topic: Power steering issues
- Replies: 18
- Views: 37607
Re: Power steering issues
You have the Tensioner mate of Boysie bring it down at the weekened
and will fit for you ,Believe we discussed it at the breaker day if i recall
and will replace with new bearing as well
and will fit for you ,Believe we discussed it at the breaker day if i recall
and will replace with new bearing as well
- Tue Dec 11, 2018 4:02 pm
- Forum: The Garage - Technical Forum
- Topic: Power steering issues
- Replies: 18
- Views: 37607
Re: Power steering issues
Top up with some fresh fluid and check the belt tensioner
mate
mate
- Sun Nov 25, 2018 7:24 am
- Forum: The Garage - Technical Forum
- Topic: VRIS issues
- Replies: 10
- Views: 21767
Re: VRIS issues
Hi Gav,could be a cracked pipe under the Intake manifold from the vaccum chamber
My Vris 1 doesn,t work but engine works A1 with no problems,you could try changing
the plug over from Vris 2 to Vris1 to check
My Vris 1 doesn,t work but engine works A1 with no problems,you could try changing
the plug over from Vris 2 to Vris1 to check
- Wed Nov 21, 2018 6:35 pm
- Forum: The Garage - Technical Forum
- Topic: Heater fan
- Replies: 5
- Views: 12866
Re: Heater fan
You will need a new heater resistor card,located left hand side below the glove box(IN FAN UNIT)
there is 2 types early/late
4 pin in block early
4 pin in line late
there is 2 types early/late
4 pin in block early
4 pin in line late