I don't know which rtv you use, but I've found that this work with both OEM or aftermarket gaskets
Sealpro ProSeal 80726 High Temperature RTV Silicone Instant Gasket, Red. (not cheap) but excellent
You can get it in black
I leave it for 24hrs and don't over tighten the rocker cover bolts
Search found 420 matches
- Wed Apr 19, 2023 8:32 pm
- Forum: The Garage - Technical Forum
- Topic: Rocker cover gasket
- Replies: 7
- Views: 3818
- Wed Apr 12, 2023 9:22 am
- Forum: The Garage - Technical Forum
- Topic: oh wot fun 95 temic system new key
- Replies: 15
- Views: 5450
Re: oh wot fun 95 temic system new key
Should have a spare or 2 about Trev :lol: finding them again will be the problem :oops: That's just like me, since I've moved, I'm still trying to find stuff, even the other week I needed a new rad cap, and I know I have a spare or two, but could I find them, No, so I ordered 4 from Rockauto's, and...
- Sat Apr 08, 2023 2:56 pm
- Forum: The Garage - Technical Forum
- Topic: oh wot fun 95 temic system new key
- Replies: 15
- Views: 5450
Re: oh wot fun
Sounds like a load of fun
- Thu Apr 06, 2023 5:45 pm
- Forum: The Garage - Technical Forum
- Topic: 16v Valve guides
- Replies: 7
- Views: 3579
Re: 16v Valve guides
Don't forget the discount code, valid until 21st AprilMicron wrote: ↑Wed Apr 05, 2023 3:12 pmHave a look here, but just remember you have to add postage and import duty, sometimes it's better to buy more to make the postage worthwhile.
https://www.rockauto.com/en/catalog/for ... guide,5776
- Wed Apr 05, 2023 7:22 am
- Forum: The Garage - Technical Forum
- Topic: 16v Valve guides
- Replies: 7
- Views: 3579
Re: 16v Valve guides
Have you tried Rockauto's
Mazda 626 2L
Mazda 626 2L
- Thu Mar 30, 2023 5:15 pm
- Forum: The Garage - Technical Forum
- Topic: engine wont turn over.
- Replies: 7
- Views: 3179
Re: engine wont turn over.
Have you check the main 100 amp fuse
- Fri Mar 24, 2023 7:11 am
- Forum: The Garage - Technical Forum
- Topic: manual gearbox oil type
- Replies: 7
- Views: 3014
Re: manual gearbox oil type
You will know when it full because it start coming out of the filler point ( all over your garage floor)
- Mon Mar 13, 2023 10:47 am
- Forum: The Garage - Technical Forum
- Topic: Engine Bay Tidy
- Replies: 4
- Views: 3203
Re: Engine Bay Tidy
I use wd40 to generally clean the engine bay and only use autosol on bright work, rubber cleaner on the hoses, loads of long handle paint brushes and a lot of the stuff we call elbow grease, and a few cut fingers, And you could end up with a engine bay something like this https://i.postimg.cc/KKmRQN...
- Mon Mar 13, 2023 10:40 am
- Forum: The Garage - Technical Forum
- Topic: clutch fluid bleed?
- Replies: 2
- Views: 1991
Re: clutch fluid bleed?
The clutch master cylinder is next to the brake master cylinder on the bulkhead, bit of a job to change The slave cylinder is at the front of a 24v engine, very easy access. I would try and bleed the clutch first, then if still no good then try changing the slave cylinder. The likely problem could b...
- Sun Mar 12, 2023 9:47 pm
- Forum: The Garage - Technical Forum
- Topic: 24v timing belt change
- Replies: 7
- Views: 3391
Re: 24v timing belt change
Last time I took one of mine to a garage, the mechanic said don't bring it back, so I haven't and do mine own cambelt changes,