Ooo ok.. I did push back one side so I’ll cross my fingers.
One last thing before I’m all set… do you know what size winder I need? Hard to believe my 8 SIDED one doesn’t fit
Thanks
Search found 22 matches
- Fri May 17, 2024 6:59 pm
- Forum: The Garage - Technical Forum
- Topic: Rear calliper/handbrake rebuild
- Replies: 8
- Views: 170
- Fri May 17, 2024 6:51 pm
- Forum: The Garage - Technical Forum
- Topic: Rear calliper/handbrake rebuild
- Replies: 8
- Views: 170
Re: Rear calliper/handbrake rebuild
The piston is wound in and out, by means of the adjuster, which is accessed via the small bolt on the back (12mm head), use an Allen Key to make the adjustments. If you put in the Allen Key and it does nothing, then check that it's actually in there. As for final adjustment, different people have d...
- Mon May 13, 2024 8:34 pm
- Forum: The Garage - Technical Forum
- Topic: Rear calliper/handbrake rebuild
- Replies: 8
- Views: 170
Rear calliper/handbrake rebuild
Just a quick one on rebuilding the rear callipers After removing the piston I find the threaded insert staring at me. I’ve read the old posts explaining what this does in regards to play but I just want some help understanding how to reinstall and put back together. Does the piston wind back in or p...
- Tue May 23, 2023 9:40 pm
- Forum: The Garage - Technical Forum
- Topic: Clips and bits for back lights
- Replies: 4
- Views: 3603
Clips and bits for back lights
1995 Ford probe 2.0 16v petrol Blue So the car didn’t come with the lights and although to have a pair and centre piece, I don’t have the fixings. Rather than guess, could someone point out what screws/plugs/fixtures i need for the photos below. Tia https://i.postimg.cc/rzmB9r6C/IMG-0258.jpg https:/...
- Wed Apr 12, 2023 11:45 am
- Forum: The Garage - Technical Forum
- Topic: Fuel pressure issue
- Replies: 2
- Views: 5325
Fuel pressure issue
Probe 2.0 / 16v 1995 Blue Hi all, I’ve got a fuel pressure issue where I’m not getting enough of it. Car only starts when the fuel pump is constantly powered via the diagnostic plug so I’m guessing it’s enough build up to start the car but can’t keep it up. Pump was changed few months ago from a car...
- Fri Feb 24, 2023 9:50 pm
- Forum: The Garage - Technical Forum
- Topic: Quick dissy question
- Replies: 0
- Views: 65027
Quick dissy question
Probe 2.0 1995 Petrol. Manual. Blue. Hey all, Hopefully an easy ask when someone has spare time Would someone be able to give me clarity and snap me a quick picture of the dissy rotor set to SP1? I’m always guessing between the edge of the 2 loom plugs but would rather know from an engine that runs....
- Wed Feb 08, 2023 3:54 pm
- Forum: The Garage - Technical Forum
- Topic: Last chance, still no start :(
- Replies: 24
- Views: 12375
Re: Last chance, still no start :(
Vaf sensor? And am I right in saying I don’t need the button fob now the moby has been bypassed? Im going to keep looking but might suspect the faulty ecu, I’ll get this checked with my local auto electrician
- Wed Feb 08, 2023 2:30 pm
- Forum: The Garage - Technical Forum
- Topic: Last chance, still no start :(
- Replies: 24
- Views: 12375
Re: Last chance, still no start :(
Update: So guys I’m really scratching my head here. Just got Off the phone to ignition parts LTD regarding the dissy service and I’ve been told that there’s nothing wrong with them. I sent 2, one that came with car and a new one (bought to be safe). So… I’ve had the car started after moby bypass It ...
- Sat Feb 04, 2023 5:57 pm
- Forum: The Garage - Technical Forum
- Topic: Last chance, still no start :(
- Replies: 24
- Views: 12375
Re: Last chance, still no start :(
Just in case you missed previous warnings on what NEVER to do. NEVER , EVER leave a spark plug lead disconnected. If you do, the high voltage will still be produced and will find its way to earth through the lowly rated transistors in the dissy circuit. Sometimes, you'll get lucky but mostly not. A...
- Sat Feb 04, 2023 4:04 pm
- Forum: The Garage - Technical Forum
- Topic: Last chance, still no start :(
- Replies: 24
- Views: 12375
Re: Last chance, still no start :(
Any Updates ;) Updates :D I’ve been on the phone to a helpful gentleman from ignition car parts LTD who’s swears they’re keeping most if not all of the UK Probes on the road :D I’ve sent both my new and old dissy to them for a bench test and repair (might as well have a spare). As the new one is pu...