Thanks, it looks like it’s as it should be and the Ford technician at my local garage was mistaken.
It’s the original calliper and not as bad as it looks but ‘out of sight etc’
If I get the engine bay looking clean it might be in with a chance!
Search found 7 matches
- Fri Jul 18, 2025 7:25 pm
- Forum: The Garage - Technical Forum
- Topic: Front brake calliper bolt
- Replies: 7
- Views: 334
- Fri Jul 18, 2025 2:11 pm
- Forum: The Garage - Technical Forum
- Topic: Front brake calliper bolt
- Replies: 7
- Views: 334
Re: Front brake calliper bolt
Hope I’ve done this right!
Doesn’t look too hopeful
Doesn’t look too hopeful
- Fri Jul 18, 2025 11:16 am
- Forum: The Garage - Technical Forum
- Topic: Front brake calliper bolt
- Replies: 7
- Views: 334
Re: Front brake calliper bolt
No, not the slide pins. It’s the main fixing bolt at the bottom of the calliper, below the bleed nipple. Part no 2W303. Ford shop manual page 06-03-3 says they should be installed before installing the bolt so maybe they are supposed to have the top open to allow access to the bolt head but it seems...
- Thu Jul 17, 2025 7:56 pm
- Forum: The Garage - Technical Forum
- Topic: Front brake calliper bolt
- Replies: 7
- Views: 334
Front brake calliper bolt
Is anyone familiar with the dust boot for this bolt?
Both of mine are just cylinders with an open top which doesn’t look right, especially when compared with the rear ones which are complete caps.
They don’t look as though they have been cut off so any suggestions?
Thanks
Both of mine are just cylinders with an open top which doesn’t look right, especially when compared with the rear ones which are complete caps.
They don’t look as though they have been cut off so any suggestions?
Thanks
- Tue Aug 02, 2022 4:12 pm
- Forum: The Garage - Technical Forum
- Topic: 24V Probe - Complete Starting Fail
- Replies: 16
- Views: 32173
Re: 24V Probe - Complete Starting Fail
If the dizzy will only go on one way, why is it necessary to be at tdc?
- Mon Apr 19, 2021 10:35 pm
- Forum: The Garage - Technical Forum
- Topic: Air Con accumulators/drier mod
- Replies: 6
- Views: 18279
Re: Air Con accumulators/drier mod
I have a drier but need the pipe which connects it to the condenser. Would anyone have one for sale or know where I could get one made up?
Thanks, Keith
Thanks, Keith
- Thu Mar 25, 2021 4:58 pm
- Forum: The Garage - Technical Forum
- Topic: Bonnet and Flash Code
- Replies: 6
- Views: 17839
Re: Bonnet and Flash Code
Hi all, Flash Code 13 I had flash code 51 which failed the MOT. I had the thermal fuse replaced and plugged the connectors in (but did not reattach unit to the chassis). I now have flash code 13 which I assume caused the fuse to blow. One of the connectors under the driver's seat has become disattac...